Accessory VPASA1 Manual (2020)

VPASA1 KIT
Pg 11/16
95303000_02
Friedrich Air Conditioning Co.
10001 Reunion Place Suite 500/ San Antonio, Texas 78216
[phone] / [phone] / www.friedrich.com
Step 7: Install VPAK Adapter Tray
 Apply double-sided tape on gasket (as shown) to assist in the installation. (See Figure 9)

Insert tray lip between the sleeve gasket and align tray shoulder flush against sleeve vertical edge.
 Once you have verified that tray is flush with cut sleeve, press tray into place with double-sided
tape.
Tip: It’s important to verify tray alignment before pressing tray into place. Double-sided tape will be
difficult to remove if alignment is incorrect.
Figure 9