Accessory VPAL2 Manual (2020)

INSTALLATION OF THE LOUVER AFTER INSTALLATION OF THE VPAWP WALL PLENUM
For safety, tie a rope or tether to the Architectural Louver, then to the divider in the Wall Plenum. This will
prevent the louver from falling from the building if it is dropped.
From inside the utility closet:
A) Grasp the louver as shown in the illustration.
B) Turn the louver sideways and push the louver out the bottom opening in the Wall Plenum.
C) Pull the louver back against the Wall Plenum and align the four holes.
D) Insert and tighten all four screws. When the louver is secured, remove the safety tether.
ATTACH THE VPAL2
LOUVER WITH THE 4
SCREWS PROVIDED
FRIEDRICH AIR CONDITIONING CO. INC.
Post Office Box 1540 · San Antonio, Texas 78295-1540
4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212
[phone] · FAX [phone]
www.friedrich.com
Printed in the U.S.A.
920-077-01 (10-04)
SAFETY TETHER
VERY IMPORTANT!