Service & Parts Manual (2019, 2020, 2021, 2022)
Table Of Contents
- INTRODUCTION
- SPECIFICATIONS
- OPERATION
- ROUTINE MAINTENANCE
- REMOVE AND INSTALL THE CHASSIS
- R-410A SEALED SYSTEM REPAIR
- COMPONENT TESTING
- Hermetic Components Check
- Reversing Valve Description And Operation
- Testing The Reversing Valve Solenoid Coil
- Checking The Reversing Valve
- Replace The Reversing Valve
- Touch Test Chart : To Service Reversing Valves
- Compressor Checks
- Compressor Replacement
- Fan Motor
- Capacitors
- Heating Element
- Drain Pan Valve
- Testing the User Interface and Electronic Control Board
- Thermistors Description
- Electronic Control Board Identification
- Replace the Electronic Control Board
- Replace the User Interface
- TROUBLESHOOTING
- WIRING DIAGRAMS
- PARTS CATALOG
- Available Accessories
29 PB
OPERATION
Wi-Fi SET UP INSTRUCTIONS (Continued)
10. Go to the Wi-Fi settings on your mobile device and connect to
“FriedrichConnect_xxxx” network. (xxxx is the network name of the
Friedrich unit)
Step 10 (Connect WiFi to “Friedrich”)
Step 11 (Click next)
12. A screen will appear asking you to enter your Wi-Fi credentials.
13. Enter the information as you recorded it at the beginning of the
process.
NOTE: Your device may auto populate the elds incorrectly.
NOTE: Be sure to enter the WIFI SSID, Network Security Type, and
Wi-Fi network password exactly as you recorded them.
NOTE: These elds are case-sensitive.
Step 12 an 13 (Enter WiFi Credentials)
11. Go back to the Friedrich instructions on your mobile device and click
next.