Baffle Adapter Kit Installation

Installation Instructions
Baffle Adapter Kit
For use with WallMaster® Series Air Conditioner
NOTE: This kit applies only to sleeves measuring 19 3/4" deep.
Model BAK
STEP 1.
Remove old air conditioning from sleeve, clean sleeve interior of debris and examine it for any
sign of damaging rust, weak construction, etc. Repair if necessary, then proceed.
STEP 2.
Check to be sure sleeve has a slight downward slope to outside by placing a level on the raised
channel near the front and a large embossment near the rear. (See Figure A)
STEP 3. Remove paper backing from double coated foam tape and place baffle assembly vertically
against rear grille between louvers (Figure A), making sure notch in baffle is at the top (Figure B).
Press seal firmly against rear panel especially at top and bottom.
93053004_01
Friedrich Air Conditioning
1001 Reunion Place Suite 500/ San Antonio, Texas 78216
[phone]/ [phone] / www.friedrich.com