Wi-Fi Operation Manual (2020, 2021, 2022)
Table Of Contents
- INTRODUCTION
- IMPORTANT SAFETY INFORMATION
- PERSONAL INJURY OR DEATH HAZARDS
- FCC Caution
- Kuhl, Kuhl Q, And Wallmaster Controls
- KUHL, KUHL Q, AND WALLMASTER
- Wi-Fi SET UP INSTRUCTIONS
- Wi-Fi TROUBLESHOOTING TIPS
- FA Pro/ FA Premier App Info
- FA Pro, FA Premier Troubleshooting
- Chill Premier/ Unifit App Info
- Chill Premier/ Unifit Registration
- Chill Premier/ Unifit Login
- Chill Premier/ UnifitTroubleshooting
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) App Info
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Registration
- Portable Air Conditioner (ZCP08SA, ZCP10SA, ZCP12SA) Login
- Portable Air Portable Air Conditioner Troubleshooting (ZCP08SA, ZCP10SA, ZCP12SA)
- Portable Air Conditioner (ZCP12DB and ZHP14DB) App Info
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Registration
- Portable Air Conditioner (ZCP12DB and ZHP14DB) Login
- Portable Air Conditioner Troubleshooting (ZCP12DB and ZHP14DB)
22 PB
FRIEDRICH GO
FA Pro/ FA Premier
5. To set the Time Function: Tap “Timer”, the App will enter the timer setting screen. Display will show the sched-
ules that were previously set. You can press to edit or add new timers.(Note: Timer is 24hr clock).
6. Click “ON” or “OFF” button to set Timer ON or Timer OFF.
You can set the: Hour, Minute, Operate Mode, Operate Fan Speed. You can also set a weekly timer. After you’re
finished setting the timer, click the button to Cancel or Save.
NOTES:
- Dry mode is preset to 4F/2C lower than room temperature, low fan speed and cannot be changed.
- Heat mode only applies to Heat Pump units.
- Fan mode is preset to 79F/26C and cannot be adjusted. -
Auto mode is preset at 79F/26C for cooling or 72F/22C for heating and cannot be adjusted.
- Cool mode, Temperature settings can be adjusted to the desired temperature.