User Manual

10 11

Control Panel OperationControl Panel Operation

The LIM Menu

This is the limit menu. See Figure 10.

Upon entering the menu, the rst option will be to set the lower setpoint

limit using the arrow buttons. See Figure 11.

Figure 10

Figure 11

Figure 12

Figure 13

Then you can set the higher setpoint limit using the arrow buttons.

See Figure 12.

Pressing the leftmost button completes the limit setting. See Figure 13.

The TM Menu

This is the TM menu used to set a timer. See Figure 14.

In the menu, you set the current time using the arrow buttons. See Figure

15. (Note: These two “set clock” steps will be skipped if the unit is already

connected to Wi-Fi.)

First, set the hour.

Figure 14

Figure 15

Figure 16

Figure 17

Using the leftmost button, you switch to the minutes and complete setting

the time. See Figure 16.

You select your mode. Either cool, heat, or auto. Toggle these using the

arrow buttons. See Figure 17. (Note: cooling-only models skip this step.)

The process is the same for all three modes. Auto mode will be shown as

the example.