Brochure

Chassis requires WSE sleeve (sold and shipped separately)
3
Sleeve Dimensions
Friedrich
WSE Sleeve
Fedders
A Sleeve
Fedders
B Sleeve
Height (inches) 16 3/4 16 3/4 16 3/4
Width (inches) 27 27 27
Depth (inches) 16 3/4 16 3/4 19 3/4
FITS EXISTING FEDDERS SLEEVES.
Optional Accessories
Height W idth Depth
Height
of Front
Width of
Front
Depth
with
Front
Minimum
Extension Into Room
with Front
Chassis 15 3/4" 26 1/2" 21" 17 1/4" 27 1/2" 23 1/4" 7 1/2"
CHASSIS DIMENSIONS
IMPORTANT:
Operating the air conditioner
with incorrect rear grille or
without Bafe Adapter Kit
(on 19 3/4” deep sleeve) will
recirculate discharge air and
cause compressor overload
to trip.
This will cause the unit to shut
down temporarily and may
lead to premature compressor
failure.
CORRECT Vertical Louvers
INCORRECT Horizontal Louvers
WallMaster
®
WSE Sleeve Exterior Grilles
Optional Architectural Grille- AG
Premium brushed aluminum
grille.
Standard Grille
Premium, stamped steel grille
with powder coat paint. Ships
with WSE sleeve. Galvanized
steel inner and outer weather
panels also ship with sleeve.
Installation Accessories
DK / Drain Kit
Installed at the back of the unit and allows for
attachment to condensate disposal system, if
necessary or desired.
IDK / Internal Drain Kit
New construction applications
where a condensate drain system
has been built into the wall interior.
BAK / Bafe Adapter Kit
Necessary when installing in a
sleeve deeper than 16 3/4" deep,
such as Fedders B sleeve
(19 3/4" deep).
Model Height W i d t h Depth
Depth
with
Front
Minimum
Extension
Outside
Thru-the-wall
Finished Hole
Height Width Max. Depth
WSE Sleeve 16 3/4" 27" 16 3/4" 24 1/4" 9/16" 17 1/4" 27 1/4" 15 5/16"
WSE SLEEVE DIMENSIONS