Thru-The-Wall Air Conditioners Brochure

NOTE: Chassis requires WSE sleeve (sold and shipped separately)
Sleeve Dimensions
Friedrich
WSE Sleeve
Fedders
A Sleeve
Fedders
B Sleeve
Height (inches) 16 3/4 16 3/4 16 3/4
Width (inches) 27 27 27
Depth (inches) 16 3/4 16 3/4 19 3/4
FITS EXISTING FEDDERS SLEEVES
OPTIONAL ACCESSORIES
IMPORTANT:
Operating the air
conditioner with incorrect
rear grille or without
Bafe Adapter Kit (on
19 3/4” deep sleeve) will
recirculate discharge air
and cause compressor
overload to trip.
This will cause the unit to shut
down temporarily and may
lead to premature compressor
failure.
CORRECT Vertical Louvers
INCORRECT Horizontal Louvers
WSE SLEEVE EXTERIOR GRILLES
Optional Architectural Grille- AG
Premium extruded aluminum grille.
Standard Grille
Premium, expanded metal grille
with powder coat paint. Ships
with WSE sleeve.
Galvanized steel inner and outer
weather panels also ship with
sleeve.
INSTALLATION ACCESSORIES
DK / Drain Kit
Installed at the back of the unit and allows for
attachment to condensate disposal system, if
necessary or desired.
IDK / Internal Drain Kit
New construction applications
where a condensate drain system
has been built into the wall interior.
BAK / Bafe Adapter Kit
Necessary when installing in
a sleeve deeper than 16 3/4"
deep, such as Fedders B sleeve
(19 3/4" deep).
Height W idth Depth
Height
of Front
Width of
Front
Depth
with
Front
Minimum
Extension Into
Room with
Front
15 3/4" 26 1/2" 21" 17 1/4" 27 1/2" 23 1/4" 7 1/2"
CHASSIS DIMENSIONS
Height W i d t h Depth
Depth
with
Front
Minimum
Extension
Outside
Thru-the-wall
Finished Hole
Height Width Max. Depth
16 3/4" 27" 16 3/4" 24 1/4" 9/16" 17 1/4" 27 1/4" 15 5/16"
WSE SLEEVE DIMENSIONS
WSE Wall Sleeve
Ships with weather panels and
grille. Sleeve is shown at right with
standard galvanized steel inner
panel, painted steel outer panel
and standard grille.
Inner steel weather panel WSE sleeve Outer weather panel Standard grille