Installation & Operation Manual (2019)
6
: LED DISPLAY
: POWER
: MODE
: TIMER
: SLEEP mode
1. FUNCTIONS Key Description:
POWER (On/ Off Key) :
- Standby mode (Default)
- Turn On/ Off the unit
- Turn on the unit, the indicator lights on.
- Turn of the unit to standby mode, the indicator lights off.
2. MODE (Functions switch key) : the switching cycle is Cooling (Default) > Dehumidifying > Heating,
and back to Cooling again.
COOLING/Heating/ Dehumidication Modes:
The indicator light turns blue for cooling, red for heating, and green for dehumidication>
If the compressor shuts down, the indicator blinks.
The display window shows setting temperature on screen.
3. TEMPERATURE REGULATION Knob (UP/Down)
- Rotate the dial in clockwise direction; the value will increase 1ºC/1ºF per scale. The maximum
value is 30ºC/86ºF (25ºC/77ºF). Rotate the dial in a counter-clockwise direction to decrease the
value 1ºC/1ºF per scale. The minimum value is 17ºC/63ºF(15ºC/59ºF).
- In DEHUMIDIFYING mode, the dial is inactive.
4. PROGRAMMABLE TIMER
- Press the key to activate the timer, the indicator lights on; press the key again to cancel
the timer setting, the indicator light will turn off.
- While the unit is operating or in standby, press the key and rotate the dial in clockwise/
counter-clockwise direction to set the Auto-Off time from 0 to 24 hours.
- During the TIMER mode, press and hold the key for 1 second, the time increases continuously
- To set the time, press the key before rotating the dial . The display will ash the on/ off time
during setting and show the time setting on screen.
DISPLAY FUNCTIONS
ZoneAire Compact I & O_98081002_02.indd 6 3/16/2018 11:13:25 AM