Manualshelf

Installation & Operation Manual (2019)

ManualsBrandsFriedrich ManualsAir ConditionersSingle Hose Smart Portable Air Conditioner with Built-In WiFi, Dehumidifier, 3-Speed Fan, Auto-Swing Louvers, Washable Antimicrobial Filters, LCD Remote Control, Sleep Control Function, and UL Listed: 13,000 BTU Cooling
12345678910
7
5. L.E.D. DISPLAY
The display indicates the current setting temperature or the timer setting. When the set temperature or
the timer is adjusted, the new setting is shown then the display returns the current set temperature.
The display is also used to show error codes should a fault occur, see TROUBLE SHOOTING.
6. FAN SPEED
Rotate the dial in clockwise direcon, the speed changes from F1 (Low) → F2 (Medium) → F3 (High)
→ AU (Auto)
Rotate the dial in counter-clockwise direcon, the speed changes backwards from AU (Auto) → F3 (High)
→ F2 (Medium) → F1 (Low)
In COOLING mode, fan speeds are available from F1 (Low), F2 (Medium), and F3 (High) to AU (Auto).
Default fan speed is in F2 (Medium) speed. Rotate the knob to F1 (Low) → F2 (Medium) → F3 (High)
→ AU (Auto) fan speed.
If “AUTO” is selected (During cooling funcon),”HIGH” or “MEDIUM” or “LOW” will be selected automacally
according to the dierence between seng temperature and ambient temperature.
7. TIMER MODE
TIMER scale: from 0 to 24 hours.
- Use the TIMER to set the Auto-O me during operang or in Stand-By mode
- While seng the TIMER, use the key or the dial is available to adjust to the desired me.
- With each press of the TIMER key, the value on the display will increase from”00”→”01”……→ to”24”
and back to “00” again.
- Set the Auto- On / Auto- O mer:
- Press the key to preset the Auto-O mer, and the display will ash the seng me. The display will
return to show operang mode aer 5 seconds.
- Press the key before the preset me to cancel the Auto-O mer, and the unit will be turned o directly.
- While seng the Auto-On mer, you can preset the funcons at the same me.
- Press the key to set the Auto-On mer. Aer seng up, the display shows the rest of me.
- Press the key before the preset me to cancel the Auto-On mer, and the unit will be turned on directly
- Aer seng up the Auto-On mer, the unit is sll available to be controlled or be switched to other funcons.
DISPLAY FUNCTIONS
ZoneAire Compact I & O_98081002_02.indd 7 3/16/2018 11:13:25 AM