User's Manual

2
1 LED instruction.
NO
Test item
Instruction
Result
1
LED
in
Idle
Mode
Press start button for 1
second when the power
of the logger is normal
LED toggle red/blue twice
2
Press start button for 1
second when the power
of the logger is low
No LED light under any
condition
3
Press and hold Flight
button for 5 seconds
No LED light and logger
can not enter Flight Mode
4
Press and hold start
button for 5 seconds then
logger from Idle mode to
Recording mode
The status LED flash Blue
every 10 seconds for 30
minutes to indicate it has
started properly After 30
minutes this flash
sequence will stop
NO
Test item
Instruction
Result
5
LED
in
Recording
Mode
Press start button for 1
second when the power
of the logger is normal
Blue flash indicates
logger is recording
6
Press start button for 1
second when the power
of the logger is low
No flash means low
battery (no LED) Battery
is dead
7
press Flight button for 1
second
No Flash means logger is
not enable Flight Mode
NO
Test item
Instruction
Result
8
LED
in
Flight
Mode
Press and hold Flight
button for 5 seconds then
logger from Recording
Mode to Flight Mode
Flight Mode LED blink
Red LED 5 times to
indicate logger has
entered Flight Mode
9
Singlepress Flight button
for 1 second and a Red
LED light indicates
Red LED light indicates it
is in flight mode
10
Press and hold flight
mode button for 5
seconds
Red LED go solid for 5
seconds and exit Flight
Mode
2 Key function instruction
NO
Test item
Instruction
Result