Use and Care Manual

10
BEFORE SETTING SURFACE BURNERS
Double Ring style burners (some models)
The Double Ring burner only operates properly with two
burner caps in place. Be sure the burner cap lips are posi-
tioned facing down towards the burner head and into the
r
ecessed areas (
Figure 5) on each side of the burner head.
Be sure both burner caps are seated firmly and rest level on
the
burner head before operating.
Check the fit for each cap usin
g the same method for the
round burner caps by gently sliding each cap from side to
side. Please note that the burner cap lips should not move
out of recessed areas of the burner head.
Figure 5: Dual burner head using two burner caps
Burner cap lip
Burner head
Recessed areas
Dual burner head (some models)
Burner caps
Burner cap
Burner
head
Please note that the burner cap should not move off the
center of the burner head when sliding from side to side.
• Check and
be sure that all oval style (some models)
burner caps are correctly in place on oval burner
heads.
• Do not use the sur
face burners without the burner
caps and burner grates properly installed.
• Missing pie
ces or improper installation may lead to
spills, burns, or damage to your range and cookware.
• Ma
ke sure the burner grates are properly placed on
the cooktop before using the surface burners
(
Figure 6). The grates are designed to rest inside the
recess on the cooktop.
• T
o install burner grates, place grates flat-side down
and align into the cooktop recess.
• Gr
ates should rest flush against each other and
against the sides of the recess.
Figure 6: Proper grate installation
IMPORTANT