Use & Care Guide
Table Of Contents
- Table of contents
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Cooking Recommendations
- Using Proper Cookware
- Cookware Material Types
- Element On and Hot Surface Indicator Lights
- Types of ceramic cooktop elements
- Before Setting Surface Controls
- Single radiant surface elements
- 1. Place correctly sized cookware on surface element.
- 2. Push in and turn the surface control knob in either direction (Figure 6) to the desired setting (refer to the “Suggested radiant surface element settings” in Table 1).
- 3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.
- Suggested radiant surface element settings
- Dual radiant surface elements
- 1. Place correctly sized cookware on the surface element.
- 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements. If only the inner element is needed for smaller cookware, push in and turn the knob counter-clockwise (see Figure 7).
- 3. When cooking is complete, turn the knob to OFF before removing the cookware.
- Figure 7: Dual element knob settings
- Triple Surface Radiant Element
- 1. Place correctly sized cookware on the triple surface element.
- 2. Push in and turn the control knob to the inner element symbol for smaller cookware or to the inner and middle element symbol for average cookware or to the inner, middle, and outer element symbol for large cookware (Figure 8). Turn the knob to adj...
- 3. When cooking has completed, turn the surface control knob to OFF before removing the cookware.
- Figure 8: Triple element knob settings
- Warm Zone
- 1. Press the Warm Zone key twice (2X) to turn the Warm Zone on. WARM ZONE will appear in the display.The temperature is preset to the optimal heating level for keeping cooked foods ready for serving.
- 2. When ready to serve, press the Warm Zone key once to turn OFF. WARM ZONE will disappear from the display
- Home Canning
- Single radiant surface elements
- Setting Surface Controls
- Before Setting Oven Controls
- Oven Control Features
- 1. Bake - Use to enter normal baking temperatures for recipes that call for regular baking.
- 2. Broil - Selects normal broil function for direct heat cooking.
- 3. Conv Bake - Circulates the oven heat evenly and continuously for faster cooking of some foods.
- 4. Conv Roast - Uses a convection fan to gently brown meats and poultry and seal in the juices.
- 5. Conv Convert - Converts standard bake temperatures to convection temperature in convection bake.
- 6. Quick Preheat - Best used for single rack baking with packaged and convenience foods.
- 7. Air Fry - Uses hot air for crispy great tasting results without all the oil.
- 8. Set Clock - Use to set the time of day
- 9. Oven Lock - Use to lock out oven controls and oven door.
- 10. 0 through 9 keys - Use to set temperature and time
- 11. Timer On-Off - Use to set or cancel the minute timer. The minute timer does not start or stop any cooking function.
- 12. Oven Light - Use to turn on internal light. Will turn on when the oven door is opened.
- 13. OK/START - Use to set cooking functions and when setting the clock.
- 14. OFF - Use to turn off all cooking functions.
- 15. Warm Zone - Uses radiant heat to keep cooked foods at serving temperature.
- 16. Self Clean - Use to set self-clean cycle between 2 and 4hrs.
- 17. Steam Clean - Use as a time saving method for cleaning light soils.
- 18. Keep Warm - Use to keep cooked foods at serving temperature.
- 19. Delay Start - Add to Quick Preheat, Bake, Conv Bake, Conv Roast, and Self Clean to program a Delay Start.
- 30 mins
- Setting the Clock
- Setting Timer
- Setting 12 Hour or 24 Hour display mode
- Changing between continuous bake setting or 12 hour energy saving
- Changing temperature display from Fahrenheit to Celsius
- Setting Silent or Audible Control mode
- Setting Oven Lockout
- 1. Be sure oven door is completely closed.
- 2. Press and hold the lock key for 3 seconds. The motor driven door latch mechanism will begin locking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely lock. Once door is locked, the word ...
- 1. Press and hold the lock key for 3 seconds. The motor door latch will begin unlocking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.
- 2. When the word DOOR with a lock icon no longer displays, the oven door may be opened, and the oven control keypad will be available for use.
- Operating Oven Lights
- Quick Preheat
- Quick Preheat is available for single rack baking with packaged and convenience foods and can be programmed for temperatures between 170°F and 550°F. Follow the recipe or package directions for food preparation time and temperature. When quick preh...
- 1. Arrange the interior oven racks.
- 2. Press Quick Preheat. 350 will appear in the display.
- 3. Press OK/START.
- 4. 350 and PREHEAT will be displayed while the oven is preheating.
- 5. Press OFF when baking is complete or to cancel the preheat feature.
- 1. Press Quick Preheat. 350 will appear in the display.
- 2. Enter the new preheat temperature. Press 4 2 5.
- 3. Press OK/START. 425 will show in the display.
- 4. When baking is complete, press OFF.
- Figure 16: Single rack baking for convenience foods
- Figure 17: Oven rack positions
- Setting Bake
- Convection Bake
- Setting Convection Convert
- Setting Delay Start
- Setting Broil
- 1. Arrange the oven racks when cool. For optimum browning results, preheat oven for 2 minutes before adding food.
- 2. Press Broil. Broil with oven door closed.
- 3. Position bakeware in oven.
- 4. Press OK/START. To adjust the broil temperature, press Broil again and then enter the new temperature using the number keys. Press OK/START.
- 5. Broil on one side until food is browned; turn and broil other side until done to your satisfaction.
- 6. When finished broiling, press OFF.
- Figure 22: Broil pan with insert(L) Rack positions (R)
- Table 2: Broil Suggestions
- 6th**
- 550°F (288°C)
- 5
- 4
- 140ºF (60ºC)
- Rare*
- 5th or 6th**
- 550°F (288°C)
- 6
- 5
- 145ºF (63ºC)
- Medium
- 5th or 6th**
- 550°F (288°C)
- 7
- 6
- 170°F (77ºC)
- Well
- 5th
- 550°F (288°C)
- 12
- 10
- 170°F (77ºC)
- Well
- 4th
- 450°F (232°C)
- 20
- 10
- 170°F (77ºC)
- Well
- 5th
- 450°F (232°C)
- 8
- 6
- 170°F (77ºC)
- Well
- 5th
- 550°F (288°C)
- as directed
- as directed
- 170°F (77ºC)
- Well
- 4th
- 550°F (288°C)
- 170°F (77ºC)
- Well
- 4th**
- 550°F (288°C)
- 6
- 5
- 145ºF (63ºC)
- Medium
- 4th
- 550°F (288°C)
- 7
- 6
- 170°F (77ºC)
- Well
- Convection Roast
- 1. Place the insert on broiler pan. Place meat (fat side up) on insert.
- 2. Make sure the insert is securely seated on top of the broiler pan. Do not use the broiler pan without the insert.
- 3. Place prepared food on oven rack and slide into oven.
- 4. Close the oven door.
- 5. Press Conv Roast.
- 6. Enter desired temperature using numeric keys.
- 7. Press OK/START.
- 8. When cooking is completed or to cancel convection roast press OFF.
- Figure 23: Convection roasting on lower oven racks
- Table 3: Convection roasting temperature and time recommendations
- Convection Roast
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 2 to 3 lb.
- 400°F (204ºC)
- *160ºF (71ºC)
- 15-25
- 12 to 16 lb.
- 325°F (163ºC)
- 170°F (77ºC)
- 8-10
- 16 to 20 lb
- 325°F (163ºC)
- 170°F (77ºC)
- 10-15
- 20 to 24 lb.
- 325°F (163ºC)
- 170°F (77ºC)
- 12-16
- 3 to 4 lb.
- 350°F-375°F (177ºC-191ºC)*
- 170°F (77ºC)
- 12-16
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-30
- 3 to 4 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-25
- 5 to 7 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- Air Fry
- 1. Arrange food on rack as suggested.
- 2. Press Air Fry. Enter the suggested temperature for particular food.
- 3. Press OK/START.
- 4. When preheat tone sounds place The tray on rack position 4.
- 5. When cooking is complete press OFF.
- Figure 24: Optional Frigidaire Air Fry Tray. Use rack position 4 with tray or dark pan with low or no sides for best results.
- Table 4: Suggested Air Fry Settings
- Air Fry
- Food
- Quantity (oz.)
- Temperature
- Cook Time (mins)
- 50 (Full Tray)
- 450 °F - 232°C
- 29-33
- 43 (Full Tray)
- 425°F - 218°C
- 25-35
- 43
- 425°F - 218°C
- 20-25
- 32
- 400°F - 205°C
- 11-13
- 25
- 400°F - 205°C
- 18-20
- 42
- 450 °F -232°C
- 18-25
- 42
- 375°F -190°C
- 60-65
- 42
- 425°F - 218°C
- 30-40
- 24
- 425°F - 218°C
- 30-40
- Setting the Sabbath Feature (for use on the Jewish Sabbath and Holidays)
- 1. Be sure the clock is set with the correct time of day.
- 2. Arrange oven racks, place bakeware in oven, and close oven door. Press Bake.
- 3. Note: If Delay Start is desired enter the timeat this point. See “Setting Delay Start” on page 26 for detailed instructions.
- 4. Press OK/START.
- 5. Press and hold Self Clean and Steam Clean simultaneously for about 3 seconds to set the Sabbath feature. Once the feature is set, SAb will appear in the display indicating the oven is properly set for the Sabbath feature (Figure 25).
- Figure 25: Oven set for Sabbath baking
- Figure 26: Display showing Sabbath failure
- Keep Warm
- Self Clean
- Setting Self Clean
- 1. Be sure the oven is empty and all oven racks are removed. Remove all items from the oven. Be sure oven door is completely closed.
- 2. Press Self Clean. The default 3 hour clean time will appear in the display. You may accept the 3 hour clean time or choose a different clean duration by entering any time between 2 and 4 hours clean time by entering the time using the numeric keys.
- 3. Press OK/START. The warning to REMOVE RACKS will flash in the display to remind you that oven racks should be removed before a self clean.
- 4. Press OK/START to activate self clean.
- 5. The warning will end and the motor door lock will begin locking the oven door and Self Clean will start.
- 1. CLEAN message will turn off, and Hot will appear in display window.
- 2. Once the oven has cooled down (about 1 hour) and Hot is no longer displayed, the oven door may be opened.
- 3. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.
- Setting Delay Start Self Clean
- Steam Clean
- 1. Remove all racks and oven accessories.
- 2. Scrape or wipe loose debris and grease from the oven bottom.
- 3. Pour 1 cup of tap water onto the oven bottom. (Figure 28) Close oven door.
- Figure 28: Add 1 cup of tap water
- 4. Press Steam Clean.
- 5. Press OK/START. St Cn will appear in the display.
- 6. To see the time remaining in the Steam Clean cycle press the Steam Clean key once. Do not open the door during this time. If door is open while in Steam Clean for more than 4 minutes an open door alarm will sound.
- 7. When the steam clean cycle is complete an alert will sound and the END message will show in the display. Press OFF to return to the clock.
- 8. Take care opening the door when the steam clean is finished. Stand to the side of the oven out of the way of escaping vapor.
- 9. Wipe oven cavity and bottom. Do not clean oven door gasket (Figure 29). Avoid leaning or resting on the oven door glass while cleaning cavity.
- 10. To cancel Steam Clean at any time press OFF.
- Figure 29: Clean around the oven door gasket
- Restoring Factory Default Settings
- Adjusting Oven Temperatures
- 1. Press and hold Bake until the control produces an audible tone (about 6 seconds). The factory offset temperature of 0 (zero) should appear in the display.
- 2. Enter 2 0 using numeric keypad.
- 3. To offset the oven by -20°F, press self clean to toggle between + and -.
- 4. Press OK/START to accept change.
- Setting the Sabbath Feature (for use on the Jewish Sabbath and Holidays)
- Setting Oven Controls
- Figure 30: Use cleaners with caution
- Cooktop Maintenance
- Cooktop Cleaning
- Remove and replace storage drawer
- 1. Open the drawer to the fully opened position.
- 2. Locate the latches on both sides of the drawer.
- 3. Pull up on the left glide latch and push down on the right glide latch.
- 4. Pull the drawer away from the range.
- 1. Align the glide latches on both sides of the drawer with the slots on the drawer.
- 2. Push the drawer back into the range.
- Removing and Replacing the Oven Door
- 1. Open oven door completely, horizontal with floor.
- 2. Pull up the lock located on each hinge support toward front of the oven until the lock stops. You may have to apply a little upward pressure on the lock to pull it up (Figure 34 and Figure 35).
- 3. Grasp the door by the sides, and close the door until the door frame makes contact with the unlocked hinges.
- 4. Pull the bottom of the door toward you while rotating the top of the door toward the appliance to completely disengage the hinge levers (Figure 36).
- 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (Figure 36).
- 2. Hold the oven door at the same angle as the removal position. Carefully insert the hinge levers into the oven frame until you feel the hinge levers are seated into the hinge notches. The hinge arms must be fully seated into the hinge notches befor...
- 3. Fully open the oven door, horizontal with floor (Figure 33).
- 4. Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 41).
- 5. Close the oven door.
- Figure 33: Door hinge location
- Figure 34: Door hinge locks
- Figure 35: Unlocking door hinge
- Figure 36: Replacement and location of hinge arm and roller pin
- Replacing the Oven Light
- 1. Turn electrical power off at the main source or unplug the appliance.
- 2. Remove the interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place.
- 3. Pull the shield straight out. Do not twist or turn.
- 4. Replace the bulb with a new appliance bulb.
- 5. Replace the glass oven light shield. Replace wire holder.
- 6. Turn the power back on again at the main source (or plug the appliance back in).
- 7. Be sure to reset the time of day on the clock.
- Figure 37: Oven light protected by glass shield
- Care and Cleaning
- Before You Call
- Warranty
- Oven Control Features
14
BEFORE SETTING SURFACE CONTROLS
Element On and Hot Surface Indicator Lights
The ELEMENT ON indicator light will turn on when one or
more elements are turned on.
A quick glance at this indicator light when cooking is
finished is an
easy check to be sure all surface elements
are turned off.
The HOT SURFACE indicator light will turn on when the
burner
i
s hot enough to cause burns and will remain on after
the burner is turned off until the surface has cooled to a safe
temperature.
Types of ceramic cooktop elements
The circles on the ceramic glass cooktop outline the size
and type of element underneath. The elements on your
cooktop depend on the model.
• A sin
gle radiant element has one circle.
• A dual radiant element (some models) has two circles.
Th
e dual radiant element may be set using only the
smaller inner element or both inner and outer elements
may be set to heat together for a larger surface.
• A triple radiant
elem
ent (some models) has three
circles. The element may be set using only the inner
element, the inner and middle elements, or all three
elements together.
• Dual and triple elements allow
more flexibility with the
size of cookware.
• A warm zon
e element (some models) has one small
circle. It is used to keep food warm after cooking. The
keep warm element is not designed to cook food.
Figure 3: On indicator light
Figure 4: Hot surface indicator light
Figure 5: Single, double, and triple elements