Complete Owner's Guide

8
OPERATING INSTRUCTIONS
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water o.
5. Select desired CYCLE (See Cycle
Chart).
6. Select desired OPTION (See Option
Selections).
7. To start, press START pad and close
door immediately.
To Start a Cycle
When cycle and options are selected,
LEDs of selected cycle and options are
illuminated. The status window displays
the cycle time and the LED above the
START pad illuminates.
To start the cycle, press START pad and
close the dishwasher door immediately.
The status window displays ‘Close’ after
the START pad is pressed.
A tone will sound indicating the cycle is
successfully started after door is closed.
To Cancel a Setting
Press the CANCEL button if you have
selected your cycle and options and
decide to cancel. The unit will go into
stand-by mode, which all LEDs will go out.
To Cancel a Cycle and Delay
Cycle
Both running cycle and delay cycle can be
canceled at any time.
Open the dishwasher door and press
the START pad until you hear a tone.
The running cycle or delay countdown is
canceled.
Press the START pad and close the door
immediately to select a new cycle after
cancelling a previous wash cycle.
Opening the door during cycle
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
The LEDs of selected cycle and options
are illuminated, the status window displays
the remaining cycle time. The LED above
START pad will blink to press start.
To resume, press START pad and close the
dishwasher door immediately.
The status window displays ‘Close’ after
the START pad is pressed.
A tone will sound indicating that the
dishwasher will begin running from the
point of interruption after the door is
closed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing START pad, the running cycle or
delay countdown will be canceled.
Child Lock Controls
Lock the dishwasher controls by pressing
and holding both DRY and DELAY TIME
pads until the lock icon between them
comes on to prevent children from starting
the dishwasher or accidentally changing
the wash cycle. To unlock the controls,
press and hold both DRY and DELAY TIME
pads until the lock icon goes o.
8
Start Button
When cycle and options are
selected, LEDs of selected cycle and
options are illuminated. The status
window displays the cycle time.
To start the cycle, press START
pad and close the dishwasher door
immediately.
The status window displays ‘Close’
after the START pad is pressed.
A tone will sound indicating the
cycle is successfully started after
door is closed.
9
Cancel Button
Press the CANCEL button if you
have selected your cycle and options
and decide to cancel. The unit will
go into stand-by mode, which all
LEDs will go out.