Specification

Specifications
subject to change.
Microwave Combination Ovens
FGMC2765P F/B 27" Electric
Microwave Combination Oven Specifications
•
Product Shipping Weight (approx.) – 215 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 6.9 / 5.2 kW
•
Amps @ 240 / 208 Volts = 28.8 / 25 Amps
•
Recommended Circuit Breaker – 30 Amps
•
Always consult local and national electric codes.
•
Minimum 21" clearance for oven door depth when open.
•
Suggested distance from floor is 11-1/2". Minimum required distance
is 4-1/2".
•
To adapt Microwave Combination Oven to fit cutout height greater
than 41-11/16", add one 2"-wide wood shim of appropriate height
to each side of opening under oven side rails. Lifting oven will hide
larger cutout opening at top and oven’s 1"-high bottom trim will
hide shims at bottom. (Standard 1"-High Bottom Trim included.)
•
To adapt Microwave Combination Oven to fit cutout height greater
than 42-3/16", optional 3"-High Bottom Trim available.
•
Minimum 24" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
•
Full oven base of solid plywood or similar material required,
capable of supporting 225 Lbs.
•
Base must be level and cabinet front must be square.
•
Microwave Combination Ovens are NOT approved to be used
in stackable or side-by-side installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
3"-High Stainless Steel Bottom Trim – (PN # 903114-901S).
•
3"-High Black Bottom Trim – (PN # 903114-9010).
•
10'-Long Armored Power Cable – (PN # 903056-9010).
27" Microwave / Wall Oven Combination
Gallery
*Critical di
mension – MUST be applied
**
F or cutout height greater
t
han 41
1 1
/ 16 ",
add one 2"-wide
wood shim of
appropriate height to each side of opening
under oven si
de rails.
Lifting oven will hide larger cutout
openi
ng at top and oven’
s 1"-high bott
om trim will hide
shims at
bottom.
(Optional 3"-high bottom trim available
for cutout
height between 42
3
/ 16 " .)
3" max.
1
1
/4"
min.
1" min.
11
1
/2"
suggested
distance
4
1
/2"
min.
required
41
1
/8"
min.
41
1
/
4
"
max.
Full base
required
to support
225 lbs.
27
1
/8"
min.
4" x 4"
opening
to route
armored
cable (right
or left side
depending
on model)
24
7
/8" min.
25
1
/4" max.
24" min. *
(critical
dimension)
2"-wide
wood spacers
(if needed)**
Electrical
junction box
location (right
or left side)
Spacer
24
5
/8"
42
3
/4"
(includes
1" bottom
trim)
1
15
/16"
24
1
/2"
27"
40
15
/16"
Allow at least
21" clearance
for door depth
when open
Power
supply
location
(middle
bottom
rear)
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FGMC2765P 12/16 © 2016 Electrolux Home Products, Inc.
Accessories information available
on the web at frigidaire.com