Use and Care Manual

Touch pad once .
Touch START pad.
Touch and hold pad .
3
2. Enter time using number
pads.
2. Time will display, after 3s,
oFF will display.
Touch Timer pad once.
2. Enter desired time using
number pads.
3. Touch Timer pad.
Timer count down does not stop even if the door is
opened. To stop/cancel the timer, press the Timer
key once. When the timer has reached the end of
set time, you will hear beep alerts indicating the
timer has run out.
When the clock display o:
Press the button to enter the clock query
state and return to the standby mode after 1
second. The clock is not displayed.
Hold down the key for 1-3 seconds to display
the current clock. After 1 second, display the
current clock and enter the clock setting mode.
Touch the +10 sec /+30 sec pad to :
+10 Sec / +30 Sec
Press +30 sec pad twice.
"Food" will be displayed if a quick start cooking
cycle or +10 Sec /+30 Sec key is pressed more
than 5 minutes after the door of microwave oven
is closed. You must open then door again to clear
''Food'' from the display.
1. Start programmed cooking.
2. Start cooking for 10 seconds/30 seconds at 100%
power level.
3. Extend cooking time in multiples of 10
seconds/30 seconds each time this pad is
touched during microwave cooking.
You may lock the control panel to prevent the
microwave from being accidentally started or
used by children.
The control lock feature is very useful when
cleaning the control panel. The lock will prevent
accidental programming when wiping the control
panel clean.
Touch and hold the Stop/Cancel pad
for more than 3 seconds. The Lock
icon will appear in the display window
along with 1 beep.
Touch and hold the Stop/Cancel pad
for more than 3 seconds. The Lock
icon will disappear in the display
window.
OPERATION
11