Installation Guide

Installation Instructions
3
MOUNT THE MICROWAVE
OVEN
B6.
8
7
5
Cabinet Front
Cabinet Bottom Shelf
T
ighten the outer two screws to the top of the
microwave oven. (While tightening screws,
hold the microwave oven in place against the
wall and the top cabinet.)
Filler Block
Equivalent
to Depth
of Cabinet
Insert 2 self-aligning screws
t
hrough outer top cabinet
holes. Turn two full turns on
each screw.
Recess
Self-Aligning Screw
Microwave Oven Top
Attach the microwave oven to the top cabi
net.
4
2
Rota
te front of oven
up against cabinet
bottom.
Insert a self-aligning screw through top center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads have engaged. (It will be
completely tightened later.) Be sure to keep
power cord tight. Be careful not to pinch the
cord, especially when mounting flush to
bottom of cabinet.
NOTE
: When mounting the
microwave oven, thread
power cord through hole in
bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by pulling
cord.
Lift microwave, tilt
it fo
rward, and hook
slots at back bottom
edge onto four
lower tabs of
mounting plate.
1
Ti
ghten center
screw completely.
Install grease filters. See the Use and C
are
packed with the microwave.
I
MPORTANT: Remove the cardhoard spacers
between heat shield and door.
FOR EASIER INSTALLATION AND PERSONAL
SAFE
TY, WE RECOMMEND THAT TWO
PEOPLE INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use the handle or
heat shield during installation. Do not remove
the cardboard spacers between the heat shield
and door.
NOTE: If your cabinet is metal, use the nylon
grommet around the power cord hole to
prevent cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom
shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from
overtightening screws.
6
EN-19