Complete Owner's Guide

8
OPERATING INSTRUCTIONS
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water o.
5. Select desired CYCLE (See Cycle
Chart).
6. Select desired OPTION (See Option
Selections).
7. To start, press START pad and close
door immediately.
Select your desired cycle and
options, then press the DELAY
TIME pad until the desired delay
time displays in the status window.
The LEDs of the selected cycle and
options are illuminated. The status
window displays the delay time and
then displays ‘Press Start’.
To start the delay countdown, press
START/CANCEL pad and close door
immediately.
The status window displays ‘Close’
after the START/CANCEL pad is
pressed.
A tone will sound indicating that
countdown has started after the
door is closed. The selected cycle
starts when the countdown is
completed.
7
START/CANCEL
Press the START/CANCEL pad and
close door immediately to start
a cycle. Press and hold for three
seconds to cancel a cycle.
Green Light
The GREEN LIGHT illuminates on the
floor when the wash is complete.
Blue Light
The BLUE LIGHT illuminates on the
floor to indicate that the wash cycle
is operating.
Opening the door while the
appliance operates
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
The LEDs of selected cycle and options
are illuminated. The status window
displays the remaining cycle time or delay
time and then displays ‘Press Start’.
To resume, press START/CANCEL
pad and close the dishwasher door
immediately.
The status window displays ‘Close’ after
the START/CANCEL pad is pressed.
A tone will sound indicating that the
dishwasher continues from the point of
interruption after the door is closed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing START/CANCEL pad, the
running cycle or delay countdown will be
canceled.
Child Lock Controls
To prevent children from accidentally
changing the dishwasher cycle or starting
the dishwasher, lock the dishwasher
controls by pressing the AIR DRY pad
until the status window displays “loc”. To
unlock the controls, press the AIR DRY
pad until “loc” is no longer displayed in
the status window.
To Cancel a Cycle and Delay Start
Both running cycle and delay countdown
can be canceled at any time.
Open the dishwasher door and press the
START/CANCEL pad until you hear a tone.
The running cycle or delay countdown is
canceled.
If desired, a new cycle can now be
selected. By pressing START/CANCEL pad
and closing the door immediately, the new
cycle will begin.
To Cancel a Setting
If you have selected your cycle and
options and decide to cancel, by pressing
the START/CANCEL pad, the unit will go
into a stand-by mode, which all LEDs will
go out.