Use and Care

17
WATER SUPPLY CONNECTION
5. With the steel clamp and screw,
secure the water supply line (copper
tubing only) to the rear panel of
appliance as shown.
6. Coil the excess water supply line
(copper tubing only), about 2½ turns,
behind appliance as shown and
arrange coils so they do not vibrate or
wear against any other surface.
7. Turn ON the water supply at shuto
valve and tighten any connections
that leak.
8. Reconnect the appliance to electri-
cal power source.
9. To turn ice maker on, press and hold
ICE MAKER on the appliance display
for 3 seconds.

NOTE
Check with your local building
authority for recommendations on
water lines and associated materials
prior to installing your new appliance.
Depending on your local/state building
codes, we recommend for homes
with existing valves Smart Choice®
water line kit 5305513409 (with a
6�Stainless Steel Water Line) and for
homes without an existing valve, we
recommend Smart Choice® water line
kit 5305510264 (with a 20�copper
water line with self-tapping saddle
valve). Please refer to Frigidaire.com for
more information.