Use and Care

23
STORAGE FEATURES
Full Width Cantilever Shelves
Multi-position adjustable metal shelves
can be moved to any position for larger
or smaller packages. The shipping spacers
that stabilize the shelves for shipping may
be removed and discarded.
To Adjust The Shelves
• Remove all food from the shelf.
• Shelves are heavy. We recommend
using 2 hands to install and remove
the shelf. We recommend placing 1
hand centered on the front trim and
the other hand centered under the
rear of the shelf.
• Lift the front edge up at a slight
angle to release the tabs from the
slots in the rear. Continue lifting the
shelf vertically until the shelf clears
the built-in shelf supports located on
the sides of the cabinet. Then pull the
shelf out.
• Replace the shelf by inserting the
mounting bracket hooks into the
desired support slots at the rear.
• Carefully lower the shelf and lock
into position.
Soft Freeze Zone
The soft freeze zone drawer remains
slightly warmer than the freezer interior
for convenient storage of soft freeze
items such as ice cream.
IMPORTANT
When placing frozen items in the freez-
er, leave a gap of at least 2" at the top
of the freezer. Stacking items to the top
can cause ice buildup.
IMPORTANT
Carefully handle the shelves when
removing and installing them to prevent
making contact with the cabinet liners
and the stainless steel rear air tower.
Do not block the air-flow vents located
on the back wall of the air-tower with
the shelves.
We recommend opening and closing the
drawer by grabbing the center of the
drawer handle.
To remove the soft freeze drawer:
1. Remove all items from the drawer.
2. We recommend using 2 hands to
remove and install the drawer from
the slide rail supports. Remove the
drawer by pulling it out until it is fully
extended. Lift up on the front of the
handle area and lift it out.
3. Carefully handle the drawer to
prevent making contact with the
cabinet liner during removal and
installation.