Use & Care Guide

9
OPERATING INSTRUCTIONS
Status Window
The STATUS window, available on some models, indicates the following activity:
1-24 . . . . . . . . Number of delay start hours.
The last hour will count
down in minutes.
MINUTES . . . Number of minutes left in
cycle (1-99).
L1----L4 . . . . Level of Rinse Aid dosage.
CLOSE Close will scroll across the
status window indicating
the door needs to be
closed.
PRESS START Press start will scroll
across the status window
indicating the START/
CANCEL pad needs to be
pressed.
*In all Error Code instances, if Pressing the cancel button or turning power o at the
breaker for 5 min. does not resolve the problem, contact the Frigidaire Customer
Care Center at 1-800-944-9044.
User Instruction Code
Error Code
Displayed
Error Code*
Problem Solution
i10 A low fill has been
detected.
Look for a pinched water supply line, or
water shuto is not completely opened.
i20; i40; iF0 Clogged filters or a
restricted drain line
has been detected.
Check and clean both filters and sump
area and check for a pinched or blocked
drain hose. If the drain line is attached to a
disposer, check that the knockout plug has
been removed.
i30 A leak or overflow
of water has been
detected in the
bottom pan.
Look for loose connections at the water
inlet valve and ensure the unit is properly
leveled.
i50 A problem has been
detected with the
drain or wash motor.
Pressing the cancel button or turning
power o at the breaker for 5 min. should
clear this error code and the unit can be
restarted.
If this does not resolve the problem,
service will need to be called.
i60 A problem has been
detected with the
water heating system.
iC0 A problem has been
detected with the
electronic control
system.
Instruction
Code
Displayed
Problem Solution
Close This indicates the
door has been
left open or not
properly latched.
Ensuring the door is properly latched will
clear the display. This does not indicate a
problem with your
dishwasher and service will not need to be
contacted.