REFRIGERATOR use & care Introduction........................................................2 Ice Maker.......................................................... 28 Important Safety Information.....................3 Storage Features...........................................30 Features...............................................................7 Storing Food and Saving Energy............ 36 Installation..........................................................9 Normal Operating Sounds...........
INTRODUCTION Welcome to our family Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together. This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues. FAQs, helpful tips and videos, cleaning products, and kitchen and home accessories are available at www.
IMPORTANT SAFETY INFORMATION WARNING Please read all instructions before using this appliance. Safety Definitions This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
IMPORTANT SAFETY INFORMATION Child Safety Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation. “just a few days”. If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents.
IMPORTANT SAFETY INFORMATION Electrical information • The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three-prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician.
FEATURES External Water Dispenser Model I E T J H M K F G L D P N A C O S U B B Q R A Water Filter L Edge-to-edge Glass Shelving B Condiment Bin M Standard bins C L-Shaped Bin N Crisper Drawers D Dairy Bin O Adjustable Temp Drawer (ATD) E Flipper Mullion P ATD Controls F Gallon Bin Q Upper Freezer Basket G Slim Bin R Lower Freezer Basket H Fresh Food Ice Maker & Bin S Freezer Ice Maker I Flipper Guide T Side control Display(Functions) J Air Filter U K
FEATURES Internal Water Dispenser Model H I E J G K D F M C A B S L N B O R P Q A Water Filter K Edge-to-edge Glass Shelving B Condiment Bin L Standard Bin C L-Shaped Bin M Crisper Drawers D Dairy Bin N Adjustable Temp Drawer (ATD) E Flipper Mullion O ATD Controls F Internal Water Dispenser P Upper Freezer Basket G Standard Bin Q Lower Freezer Basket H Flipper Guide R Freezer Ice Maker I Air Filter S Side Control Display J Slide Under ½ width shelves
INSTALLATION Tools Necessary: (OR) Phillips Head or Quadrex Head Screwdriver AND OR AND ⅜" and ¼" Socket Wrench 6mm Allen Wrench Components Provided: Top Hinge Cover Front Screw Top Hinge Cover Rear Screw OR Adjustable Wrench ⅜" Fixed Wrench WARNING This appliance is intended for use in residential household and similar interior applications such as: • Kitchen / Kitchenette Top Lower Hinge Hinge Screw Screw • Pantry Room • Basement • Enclosed Garage • Other interior residential type enviro
INSTALLATION 3. NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider. 9 Ensure both doors are bind-free with their seals touching the cabinet on all four sides and that cabinet is stable. 4. After unit is leveled, lower the antitip leg until it firmly contacts the floor. An adjustable wrench may be necessary for adjustment.
INSTALLATION Flipper Mullion 2. Adjust Flipper Mullion for proper connection with the mullion guide by ensuring the flipper mullion is folded and perpendicular to the fresh food door. If the mullion guide is not in the correct position, it could prevent the door from closing completely. Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion.
DOOR REMOVAL 11 Getting through narrow spaces If your refrigerator will not fit through an entrance area, you can remove the doors. Check first by measuring the entrance. To prepare for removing the doors: 1. Make sure the electrical power cord is unplugged from the wall outlet. 2. Remove any food from the door shelves and close the doors. WARNING Make sure the electrical power cord is unplugged from the wall outlet. To remove refrigerator doors: 1.
3. DOOR REMOVAL Trace lightly around the door’s top hinges with a pencil. This makes reinstallation easier. 4. Remove bulkhead cover at rear of unit to access water tubing. Disconnect the water tube at the push-lock connection on the rear of the unit below the bulkhead. The dispenser line is connected to the yellow water line coming from the main water valve. 5. Pull the water tube out of the conduit from the top of the cabinet.
DOOR REMOVAL 7. Remove hex screws from top hinge plate, then remove the top hinge. 13 To reinstall the refrigerator doors: 1. Replace three bottom hinge screws and hinges on both sides of the cabinet. Ensure screws are tightly snug to hinges on both sides of the cabinet before re-installing doors 2. Holding the door at a 90 degree angle, drop the pin down into the bottom hinge opening. Rotate it slightly in either direction until the door falls onto the hinge and is fully seated. Pin Mechanism 8.
DOOR REMOVAL To reset door pin: NOTE Upon replacement, the tube needs to be fully inserted up to the marking line. 3. If doors are removed at less than a 40 degree angle, the pin returns to the home position. It can be reset by turning the door upside down and using a 5/32” Allen wrench to rotate the left hand pin 90 degrees clockwise and the right hand pin 90 degrees counterclockwise. Reinstall top hinges and screws. 4.
DOOR REMOVAL Removing Freezer Drawer CAUTION Replacing Freezer Drawer 1. Extend the Freezer slides from the unit. 2. Carefully align support pin with hooks on end of freezer slides and then lower freezer door onto slides. 3. Replace the 4 hex head screws that secure the slides to the door (2 on each side) and tighten. Drawer is heavy. Use caution when lifting. 1. Remove 4 hex head drawer screws (2 per side) that secure the drawer to the slide assemblies. 2. Lift up drawer to remove.
DOOR HANDLE INSTALLATION CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles. Door Handle Mounting Instructions Remove handles from carton and any other protective packaging. 2. Position refrigerator handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3.
WATER SUPPLY CONNECTION • A water supply line made of ¼ inch (6.4 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the water inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 6 feet (1.8 meters), so the refrigerator can be moved out for cleaning (as shown). • A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.
WATER SUPPLY CONNECTION 4. If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch/6.4 mm). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1. • 5. If you use braided flexible stainless steel tubing - The nut is already assembled on the tubing.
CONTROLS AND SETTINGS 19 External Water Dispenser Control Display Mode Views Your display is equipped with a sleep and lock mode to prevent accidental changes to the unit settings during opening and closing of the doors. When both doors are closed, the display will be in sleep mode. When either door is first opened, the display will be in lock mode where all the current settings are visible but dimmed. Pressing any button on the display will awake the display and a tone will be played.
CONTROLS AND SETTINGS External Water Dispenser Control Display 1 Change Temperature Select Freezer or Refrigerator icon to change temperature. Press +/- buttons to set the temperature 3 4 5 6 7 8 -6˚F/-21˚C – +6˚F/-15˚C Refrigerator control range: +34˚F/+1˚C – +44˚F/+7˚C 2 Clear Alerts Resets any alarms that are active and illuminated on the display (DOOR OPEN, HIGH TEMP, POWER OUTAGE).
CONTROLS AND SETTINGS 21 External Water Dispenser Control Display Clear Alerts Door Open If the freezer or refrigerator doors have been left open for five minutes or more, an alarm will sound and the door open indicator will illuminate on the display. Press “CLEAR ALERTS” to reset any system alarms. High Temp Alarm HIGH TEMP will illuminate next to clear alerts button. Alarm is played every 60 seconds.
CONTROLS AND SETTINGS Internal Water Dispenser Control Display 1 Change Select Freezer or Refrigerator icon to Temperature change temperature. Press +/- buttons to set the temperature 3 5 Refrigerator control range: +34˚F/+1˚C – +44˚F/+7˚C Clear Alerts Resets any alarms that are active and illuminated on the display (DOOR OPEN, HIGH TEMP, POWER OUTAGE). 3 Freeze Boost Prior to grocery shopping, we recommend you activate Freeze Boost to lower the temperature and freeze food faster.
CONTROLS AND SETTINGS 23 Internal Water Dispenser Control Display Clear Alerts Sabbath Mode Door Open The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community. If the freezer or refrigerator doors have been left open for five minutes or more, an alarm will sound and the door open indicator will illuminate on the display.
AUTOMATIC ICE & WATER DISPENSER External Dispenser -Refrigerator Ice Maker Priming the water supply system Using the dispenser after installation Before making ice for the first time, be sure to prime the water supply system. Air in new plumbing lines can result in two or three empty ice maker cycles. Furthermore, if the system is not flushed, the first ice cubes may have discolored water or have an odd flavor. NOTE Dispensed water is not chilled.
AUTOMATIC ICE & WATER DISPENSER 25 External Dispenser -Refrigerator Ice Maker Turning the refrigerator ice maker on and off Ice production is controlled by the ice maker’s On/Off feature on the control panel. Pressing the On/Off feature turns the ice maker on & off. Ice maker/dispenser tips • If your refrigerator is not connected to a water supply or the water supply is turned off, turn off the ice maker as described in the previous section.
AUTOMATIC ICE & WATER DISPENSER External Dispenser -Refrigerator Ice Maker Cleaning the ice maker Clean the ice maker and ice bin at regular intervals, especially prior to vacation or moving. CAUTION NEVER use an ice pick or similar sharp instrument to break up the ice. This could damage the ice bin and dispenser mechanism. To loosen stuck ice, use warm water. Before replacing the ice bin, make sure it is completely dry. IMPORTANT Removing Ice Bin 1. 2. Turn off the ice maker.
AUTOMATIC ICE & WATER DISPENSER 27 Internal Water Dispenser (select models) Your refrigerator is equipped with an internal water dispenser mounted inside the cabinet, on the left hand fresh food door. Using the dispenser after installation Water dispenser ON Water dispenser OFF 1. Your appliance will arrive with the water dispenser already activated and ready to use.
ICE MAKER Freezer Ice Maker Freezer Ice Maker Ice Maker Operation & Care After the refrigerator is installed properly, the ice maker can produce ice within 24 hours. When using the ice maker for the first time, and in order for it to work properly, it is necessary to clear air from the water tubing and the filter. Furthermore, if the system is not flushed, the first ice cubes may be discolored or have an odd flavor.
ICE MAKER Freezer Ice Maker Cleaning the ice maker bin Clean the ice maker and ice bin at regular intervals, especially prior to vacation or moving. 1. Turn off the ice maker. 2. Remove the ice bin. 3. Empty and carefully clean the ice bin with mild detergent. Do not use harsh or abrasive cleaners. Rinse with clean water. 4. Allow the ice bin to dry completely before replacing in the freezer. 5. Replace the ice bin. Turn the ice maker on.
STORAGE FEATURES Shelves CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher. You can easily adjust shelf positions in the refrigerator compartments to suit your needs. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment.
STORAGE FEATURES Drawers Your refrigerator includes a variety of storage drawers. Crispers Crisper drawers are designed for storing fruits, vegetables, and other fresh produce. 31 To remove the auto humidity control membrane: 1. Remove crispers, crisper cover divider, and crisper cover from the unit. 2. Remove three screws on the bottom of the crisper cover to release the auto humidity cover, 3. Slide out auto humidity cover from the crisper cover to gain access to the humidity membrane 4.
STORAGE FEATURES To remove the Crisper Drawer with PureAir Produce Keeper™ for cleaning: 1. Pull the drawer out until it stops. 2. Lift the front slightly and remove the drawer. Removing Crisper Drawer CAUTION Remove the produce keeper prior to washing the crisper drawer. To replace the Crisper Drawers with PureAir Produce Keeper™ after cleaning: 1. Place the crisper drawer on top of the deli cover and tilt upwards slightly.
STORAGE FEATURES 33 Adjustable Temp Drawer 1 2 Ideal for storage of deli meats, cheese, and beverages. Using your Adjustable Temp Drawer IMPORTANT Do not use the Adjustable Temp Drawer to store fresh produce as these items may freeze and cause damage to the fruits and leafy vegetables stored in the drawer. 3 4 1 Lock Control The drawer automatically defaults to a locked state to prevent any unwanted use. To change the drawer’s settings, it first needs to be unlocked.
STORAGE FEATURES Doors Freezer Accessories Storage bins (varies by model) Your freezer has baskets and dividers that can be adjusted to your needs. The doors to your refrigerator compartment use a system of modular storage bins. All of these bins are removable for easy cleaning. Some of them have fixed positions, while others can be adjusted to your needs. Remove Upper Freezer Basket 1. Open freezer drawer fully. 2. Extend upper freezer drawer all the way out from the cabinet. 3.
STORAGE FEATURES Upper Freezer Basket Replacement 1. 2. 3. 35 To Remove Lower Freezer Basket: Open Freezer drawer completely. Pull both upper slides out of the freezer compartment, extending them fully. Take upper basket assembly and snap basket back into the docks on the slide assemblies. Perform this on one side at a time as slides will move freely during installation. 1. Open freezer compartment completely. 2. Locate basket clips in the rear corners of the basket and pull them out to remove.
STORING FOOD AND SAVING ENERGY Loading the freezer • Prior to grocery shopping, activate Refrigerator storage Freeze Boost so that on your return you can ensure your newly purchased • Keep the refrigerator compartment food designated for the freezer will be between 34°F and 40°F with an preserved as quickly as possible. optimum temperature of 37°F.
NORMAL OPERATING SOUNDS NOTE Energy efficient foam in your refrigerator is not a sound insulator. NOTE During automatic defrost cycle, a red glow in the back wall vents of your freezer compartment is normal. Understanding the sounds you may hear Your new, high-efficiency refrigerator may introduce unfamiliar sounds. These sounds normally indicate your refrigerator is operating correctly. Some surfaces on floors, walls, and kitchen cabinets may make these sounds more noticeable.
FILTER REPLACEMENT Air filter The air filter is located at the top of the air tower. Ordering replacement filters Order new filters by calling 877-8084195, online at www.frigidaire.com/ store, or through the dealer where you bought your refrigerator. You may want to consider ordering extra filters when you first install your refrigerator. Air Filter Replacement cartridge, part # FRGPAAF2 Locating the Water Filter Your refrigerator is equipped with water filtering system.
FILTER REPLACEMENT Replacing the Water Filter The water filter is located at the bottom left of the refrigerator compartment next to the Adjustable Temp Drawer. In general, you should change the water filter every 6 months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water (125 gal/453 L for PurePour™) has flowed through the system.
Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector). 6. Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal. 7. After filling one glass of water, continue flushing the system for about 4 minutes. 8. Turn On the ice maker(s). 9.
CARE & CLEANING 41 Protecting your investment Keeping your refrigerator clean maintains its appearance and prevents odor build-up. NOTE Do not use abrasive cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum products on plastic parts, interior doors, gaskets, or cabinet liners. Do not use paper towels, scouring pads, or other abrasive cleaning materials.
CARE & CLEANING Vacation and moving tips Occasion Tips Short • Leave refrigerator operating during vacations of three weeks or less. Vacations • Use all perishable items from refrigerator compartment. • Turn automatic ice maker off and empty ice bucket, even if you will only be gone a few days. Long • Remove all food and ice if you will be gone one month or more. Vacations • Turn the cooling system off (see “Controls” section for location of On/ Off button) and disconnect power cord.
TROUBLESHOOTING 43 Let us help you troubleshoot your concern! This section will help you with common issues. If you need us, visit our website, chat with an agent, or call us. We may be able to help you avoid a service visit. If you do need service, we can get that started for you! 1-800-265-8352 (Canada) Frigidaire.ca 1-800-374-4432 (United States) Frigidaire.com Concern Potential Cause Automatic Ice Maker Ice maker is not making any ice. • Ice maker is turned off.
TROUBLESHOOTING Concern Potential Cause Automatic Ice Maker (Cont’d) Ice maker is not making enough ice. • Ice maker is producing less ice than you expect. • The water filter may be clogged with foreign material. • The water supply line is kinked. • Saddle valve on cold water pipe is clogged or restricted by foreign material. • Heavy traffic, opening or closing of the doors excessively. • Freezer control is set too warm (freezer ice maker).
TROUBLESHOOTING Concern Potential Cause Dispenser (Ice & Water) Dispenser will not dispense ice. Ice dispenser is jammed. Dispenser will not dispense water. 45 Common Solution • There is no ice in the bin to be dispensed. • See the “Ice maker is not making any ice” section above. • The refrigerator doors are not completely closed. • Be sure the refrigerator doors are completely closed. • Dispenser paddle has been pressed too long and the dispenser motor has overheated.
TROUBLESHOOTING Concern Potential Cause Common Solution Opening/Closing Of Doors/Drawers Door(s) will not close. Drawers are difficult to move. • Door was closed too hard, causing other door to open slightly. • Close both doors gently. • Refrigerator is not level. It rocks on the floor when moved slightly. • Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor. • Refrigerator is touching a wall or cabinet.
TROUBLESHOOTING 47 Concern Potential Cause Common Solution Water/Moisture/Frost Inside Refrigerator Moisture collects on inside of refrigerator walls. • Weather is hot and humid. • The rate of frost buildup and internal sweating increases. • Flipper mullion • Adjust flipper mullion. (See “To adjust the flipper mullion” in the Installation section.) Water collects on bottom side of drawer cover. • Vegetables contain and give off moisture.
LIMITED WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1.
welcome home Our home is your home. Visit us if you need help with any of these things: owner support accessories service registration (See your registration card for more information.) Frigidaire.com 1-800-374-4432 Frigidaire.
