Quick Start Guide

started
GETTING
WITH YOUR MULTI-DOOR REFRIGERATOR
YOU’RE IN CONTROL
Appliance Control Display
For the first 24 hours, we recommend setting the temperature at 37˚F (3˚C) for the fresh food compartment and
0˚F (-18˚C) for the freezer. After 24 hours, you can adjust the temperature control as desired.
*Control display varies by model.
A20832701 (2109)
REMEMBER
See your Use & Care Manual for more detailed information
about your appliance.
1
CHANGE
TEMPERATURE
Select Freezer or Refrigerator
icon to change temperature.
Press +/- buttons to set the
temperature.
Freezer control
range:
-6˚F/-21˚C –
+6˚F/-15˚C
Refrigerator
control range:
+34˚F/+1˚C –
+44˚F/+7˚C
2
CLEAR
ALERTS
Resets any active lit door
open, high temp or power
outage alarms on the
control display.
3
FREEZE
BOOST
Activate Freeze Boost prior
to grocery shopping to
lower the temperature and
freeze food faster. Freeze
Boost will remain active for
up to 24 hours.
4
F/C
Touch to toggle display
from Fahrenheit to Celsius.
5
ICE MAKER
Press and hold for 3
seconds to turn ice maker
on/o. When indicator is lit,
ice maker is on.
6
DEFAULT
SETTINGS
Press and hold for 3
seconds to reset to Factory
settings.
7
8
WATER FILTER
AIR FILTERS
Press and hold to reset after
filter has been replaced,
status shown at right of
button will reset to GOOD.
1
CHANGE
TEMPERATURE
Select Freezer or Refrigerator
icon to change temperature.
Press +/- buttons to set the
temperature.
Freezer control
range:
-6˚F/-21˚C –
+6˚F/-15˚C
Refrigerator
control range:
+34˚F/+1˚C –
+44˚F/+7˚C
2
CLEAR
ALERTS
Resets any active lit
door open, high temp or
power outage alarms on
the control display.
3
FREEZE
BOOST
Activate Freeze Boost
prior to grocery shopping
to lower the temperature
and freeze food faster.
Freeze Boost will remain
active for up to 24 hours.
4
F/C
Touch to toggle display
from Fahrenheit to
Celsius.
5
WATER
DISPENSER
When the water
dispenser is turned on
the LED’s above Water
Dispenser will illuminate.
6
DEFAULT
SETTINGS
Press and hold for 3
seconds to reset to
Factory settings.
7
8
WATER FILTER
AIR FILTERS
Press and hold to reset
after filter has been
replaced, status shown at
right of button will reset
to GOOD.
WATER
Press “WATER” to select
water.
CRUSHED
Press “CRUSHED” to select
crushed ice.
CUBES
Press “CUBES” to select
cubed ice.
LIGHT Toggles dispenser light on
and o.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
External Water Dispenser Controls
EXTERNAL DISPENSER CONTROL DISPLAY INTERNAL DISPENSER CONTROL DISPLAY
BEFORE YOU START
SET UP YOUR REFRIGERATOR
Remove tape and glue residue from surfaces before turning on the refrigerator. Choose a place
near a grounded electrical outlet, allowing for clearances for ease of installation, proper circulation,
and plumbing and electrical connections.
BEFORE OPERATING FOR THE FIRST TIME
Clean the inside of your appliance before using it. See CARE AND CLEANING in your Use & Care
Manual. To ensure safe food storage, allow the appliance to operate with the door closed for at
least 8 hours before loading it with food.