Filtered Ice Kit Installation Instructions

Instructions: A20113801

2 of 5

INSTRUCTION SHEET

FILTERED ICE KIT: TTFLTRICEKIT

NOTE: This kit is designed to provide ltered water to the freezer ice maker when a single-door freezer

is installed next to a single-door refrigerator.

NOTE: An authorized service technician is recommended to install the ltered ice kit.

Tools Required: 1/4” nut driver

NOTE: Disconnect electrical power prior to servicing this product.

Access Cover Removal

CAUTION: Wear gloves and use extreme CAU-

TION when installing the PROTECTIVE rubber

trim. The opening may have sharp edges.

1. Remove the 8 access panel screws on the

refrigerator and Freezer.

2. Apply the protective rubber trim (D) to the

inside edge of water valve opening on both

access covers.

(D)

Models: FPFU19F8WF

FPRU19F8WF

EI33AF80WS

EI33AR80WS