Installation Instructions

ManualsBrandsFrigidaire ManualsAppliances2 Piece Kitchen Appliances Package with FFEW3026TB 30" Electric Single Wall Oven and FFGC3026SB 30" Natural Gas Cooktop in Black

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS

(and Optional Electric or Gas Cooktop Combination)

Anti-Tip Mounting Holes

Figure 6

Figure 7

Bottom Trim

Screws

supplied

6 Install the Anti-tip Mounting Screws

The wall oven can tip when the door is

open. The anti-tip mounting screws supplied with the

wall oven must be installed to prevent tipping of the

wall oven and injury to persons.

A. The mounting holes in the side trims may be

used as a template to locate the appliance mounting

screw holes (see gure 6).

B. Use the two screws supplied to x the appliance

to the cabinet.

7 Install the Bottom Trim

Bottom trim must be installed for the

oven to function properly. DO NOT operate the oven

without bottom oven trim installed. Do not use wood

or any other trim that is not manufactured for use

with this model. Operating the appliance without

manufacturer's bottom trim properly installed may

cause personal injury and may damage cabinetry or

the appliance.

Screws to attach the bottom trim are supplied with

the oven. Screws are located in the mounting holes

located on each side trim, below the oven frame

(see Figure 7).

A. Remove the screws from the mounting holes.

B. Place the top of the bottom trim over the side trim

tabs on each side of the oven below the oven door.

C. Attach the trim using the provided screws.

Tip Over Hazard

• A child or adult can tip the oven

and be killed.

• Install the anti-tip device to oven

and/or structure per installation

instructions.

• Ensure the anti-tip device is re-engaged when the

oven is moved.

• Do not operate the oven without the anti-tip device

in place and engaged.

• Failure to follow these instructions can result in

death or serious burns to children and adults.

Refer to the installation

instructions supplied with your

appliance for proper installa-

tion.

Check for proper installation

with a visual check that the

anti-tip screws are present.

Test the installation with light

downward pressure on the

open oven door. The oven

should not tip forward.

Anti-tip mounting holes