All about the Use & Care of your Wall Oven TA B L E O F C O N T E N T S Care & Cleaning (Oven Cleaning Chart).................. 24 Important Safety Instructions..................................3 Care & Cleaning ..................................................25 Features at a Glance...............................................5 Before You Call ...................................................26 Before Setting Oven Controls..................................6 Major Appliance Warranty...........
Welcome & Congratulations Product Registration Register Your Product The PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to Electrolux Home Products. Serial Plate Location Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority.
Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING CAUTION This symbol will help alert you to situations that may cause bodily injury or property damage.
Important Safety Instructions Electronic controllers can be damaged by cold temperatures. When you use your appliance for the first time, or if it has not been used for a long period of time, make sure that it has been exposed to a temperature above 0°C/32°F for at least 3 hours before connecting it to the power supply. • Placement of Oven Racks. Always place oven racks in desired location while oven is cool. Remove all utensils from the rack before removing rack.
FEATURES AT A GLANCE Your electric wall oven features: 1. Electronic oven control with clock and kitchen timer. 2. Oven vent. 3. Oven light. 4. Broil element. 5. Self-clean convection oven. 6. Convection bake cooking system fan. 7. Adjustable oven rack. 8. Door handle. 9. Stainless steel front oven door with large window opening 10. Bottom trim NOTE The features shown for your appliance may vary according to model type & color.
BEFORE SETTING OVEN CONTROLS Oven Vent Location Arranging Oven Racks The oven is vented as shown. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT block vent, doing this may cause damage to the unit or cause a fire. Always arrange oven racks when THE oven is cool (Prior to operating the oven). Always use oven mitts when using the oven. To remove an oven rack, pull the rack forward until it stops.
BEFORE SETTING OVEN CONTROLS Types of Oven Racks Your appliance may be equipped with three types of the oven rack, as shown; • 1 Flat Handle Oven Rack (Figure 1). • 1 Flat Oven Half Rack (Figure 2 & 3). • 1 Offset Oven Rack (Figure 4). Flat Handle Oven Rack Figure 1 CAUTION Always use pot holders or oven mitts when adjusting the oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns.
BEFORE Setting OVEN controls Control Pad Features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide. 1. FAVORITE PAD—Use to record a temperature setting for a cooking feature. 2. BAKE PAD—Use to select the bake cooking feature. 3. BROIL PAD—Use to select the broil cooking feature 4.
BEFORE Setting OVEN controls Important Things to Know Before Setting any Oven Cooking Feature This appliance has been factory pre-set to start any BAKE, CONVECTION BAKE, CONVECTION ROAST or PREHEAT feature with the oven set temperature automatically set for 350°F. The BROIL or CONVECTION BROIL features are pre-set at 550°F. However if desired, the oven set temperature may be adjusted at any time during the cooking process.
Setting OVEN controls Setting the Clock The CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash. To set the clock (example below for 1:30) 1. Press CLOCK. “CLO” will appear in the display. 2. Press 1 3 0 pads to set the time of day to 1:30.
Setting OVEN controls Setting MINUTE Timer The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings. To set the Minute Timer (example for 5 minutes) 1. Press TIMER ON.OFF. “-- --” will appear in the display. 2.
Setting OVEN controls Setting Power Preheat Setting Bake The Power PREHEAT pad controls the Power Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F (77°C to 288°C). The BAKE pad controls normal baking.
SETTING OVEN CONTROLS Setting Convection Bake 4 This mode of cooking enables you to obtain the best culinary results when baking with multiple pans and racks. Multiple rack baking may slightly increase cook time for some foods but the overall result is time saved. Some food may cook faster and more evenly with Convection Bake. Convection baking uses the three elements and a fan to circulate the oven’s heat evenly and continuously within the oven.
SETTING OVEN CONTROLS Setting Convection CONVERsion Setting Convection Roast The Convect Convert pad is used to automatically convert a standard baking recipe for convection baking. When set properly, this feature is designed to display the actual converted (reduced) temperature in the display. Convect Convert may ONLY be used with a Convection Bake cooking mode. It can be used with the features Delay Start and Bake Time (see their sections for directions).
SETTING OVEN CONTROLS Setting Convection BROIL Use this mode for thicker cuts of meat, fish and poultry. The Convection Broiling gently browns the exterior and seals in the juices. Convection broiling uses the broil element and a fan to circulate the oven’s heat evenly and continuously within the oven. The oven can be programmed for Convection Broiling at any temperature between 400°F to 550°F (204°C to 288°C) with a default temperature of 550°F.
SETTING OVEN CONTROLS Setting BAKE TIME Setting DELAY START Bake Time allows the oven to be set to cook for a specific length of time and shut off automatically. The BAKE, CONVECTION BAKE, BAKE TIME and DELAY START pads control the Delayed Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on and off at the time you select in advance. The oven will shut off and will beep when the countdown is finished.
SETTING OVEN CONTROLS SETTING BROIL This mode is best for meats, fish and poultry up to 1” thick. Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven. The high heat cooks quickly and gives a rich, brown outer appearance. The BROIL pad controls the Broil feature. An optional Searing Grill, Broiler Pan and Insert are available via the enclosed accessories brochure (Figure 2 & 3).
SETTING OVEN CONTROLS SETTING NUGGETS SETTING PIZZA The NUGGETS pad has been designed to give optimum cooking performance when cooking your favorite chicken nuggets. The Nuggets pad is preset for a Convection Bake at (400°F/204°C) with a Bake Time of 18 minutes, ending with a Keep Warm setting. If needed, a different target temperature or Bake Time than the presets can be entered. The PIZZA pad has been designed to give optimum cooking performance when cooking your favorite pizza.
SETTING OVEN CONTROLS SETTING WARM SETTING FAVORITE This mode is best for keeping oven baked foods warm for serving after cooking has finished. The WARM pad turns ON the Warm feature and will maintain an oven temperature of 170°F (77°C). The Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm feature will shut the oven OFF.
SETTING OVEN CONTROLS SETTING the Sabbath Feature (for use on the Jewish Sabbath & Holidays) The BAKE TIME and DELAY START pads are used to set the Sabbath feature. The Sabbath feature may only be used with the BAKE pad. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not visibly show or provide any audible tones indicating whether the change occurred correctly.
SETTING OVEN CONTROLS Adjusting Oven Temperature Oven light The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature.
SETTING OVEN CONTROLS SELF-CLEANING What to Expect during Cleaning A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth. IMPORTANT Adhere to the following cleaning precautions: • DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior. • DO NOT clean the oven door gasket.
SETTING OVEN CONTROLS SETTING A SELF-CLEAN CYCLE The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.
CARE & CLEANING Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. Remove spillovers and heavy soiling as soon as possible. Regular cleaning will reduce the number of major cleaning later. Surface type Recommendation • Aluminum & Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth.
Care & Cleaning Removing and Replacing the LiftOff Oven Door CAUTION Around Oven door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To Remove Oven Door: 1. Open oven door completely (horizontal with floor See Figure 1). 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small flat-blade screwdriver may be required. 3.
Before you call - Solutions to Common Problems Oven Baking For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance. Baking Problems and Solutions Chart Baking Problems Causes Corrections Cookies and biscuits burn on the bottom.
Solutions to Common Problems - Before you call IMPORTANT Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Oven Control Beeps and Displays an “F” Error Code Electronic control has detected a fault condition. Push CANCEL pad to clear the display and stop the display from beeping. Reprogram the oven.
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.