User manual

3
shock hazard rasulting from the plug being inserted into a 13 amp socket
elsewhere in the house. A suitable replacement plug should then be fitted as
given below.
IMPORTANT
The wires in the mains lead of this appliance are coloured in accordance with
the following code:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead
may not correspond with the coloured
markings identifying the terminals in your
plug, proceed as follows.
Connect the GREEN-AND-YELLOW
coloured wire to the plug trminal marked
letter E or earth symbol or coloured green
or green-and-yellow.
Connected the BROWN coloured wire to the plug terminal marked letter L or
coloured red.
Connected the BLUE coloured wire to the plug terminal marked letter N or
coloured black.
SWITCHING ON
Inside the refrigerator you will find a plastic bag contanining 4 small wheels.
Carefully place the refrigerator on its back and insert the pins of the wheels into
the metal holders located on the underside of the refrigerator. In this way you
can always move your refrigerator to where it is needed.
To switch on the refrigerator, plug it into the socket and turn the thermostat (in
the inside compartment) to position 3 or 4. The appliance start to cool in about
one hour.
The temperature inside the refrigerator is affected by location, room temperature
and too frequent opening of the door. Adjustment of the thermostat dial may
therefore be necessary.
TEMPERATURE CONTROL
The cooling capacity can be adjusted with the thermostat. 0=cooling is switched
off, from 1-7 the temperature decreases. When the thermostat is at a medium
setting (3 or 4) and the ambient temperature is normal, the temperature inside
the refrigerator is between 0°-7° C.