Household Beverage Cooler Record Serial/Model Numbers ………………....2 Important Safety Instructions ……….………….2 First Steps …………………………….……………3 General Operation ………………………………..6 Helpful Hints ………………………….……………7 Energy Saving Tips ..……………..………………8 Beverage Cooler Features ………………………8 Cleaning and Maintenance ……………….……..8 Warranty …………………………………….….…10 Troubleshooting Guide ………………………...
• Destroy or safely discard carton, plastic bags, and any exterior wrapping material immediately after the beverage cooler is unpacked. Children should never use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation. • Remove all staples from the carton. Staples can cause severe cuts, and destroy finishes if they come in contact with other appliances or furniture.
• If voltage varies by 10% or more, performance of your beverage cooler may be affected. Operating beverage cooler with insufficient power can damage the compressor. • To prevent the beverage cooler from being turned off accidentally, do not plug unit into an outlet controlled by a wall switch or pull cord. It is recommended that a separate circuit serving only your beverage cooler be provided. • Do not pinch, knot, or bend the cord in any manner.
BEVERAGE DELIVERY KIT BOX (9) Faucet and Shank Assembly (10) Plastic Collar (11) Shank Nut (12) Faucet Knob (13) Regulator (14) Keg Coupler (15) Clear Hose (Delivery Line) (16) Red Hose (Gas Line) (17) Rubber Washer (Black) (18) Plastic Hose Clamp (White) (19) CO2 Canister (Empty) (9) FAUCET & SHANK ASS’Y.
CO2 CANISTER BRACKET INSTALLATION REGULATOR INSTALLATION • Align the two bracket holes with the screw anchor holes located on the lower left side of the cabinet (the actual screw anchor holes are centered behind the taped hole). • Secure the CO2 canister bracket (4) to the cabinet with TM the two supplied mounting screws (5) using a Phillips screwdriver. • Fasten the CO2 regulator (13) to the CO2 canister (19), tightening the nut securely. DO NOT over tighten.
CLEAR HOSE TO DOOR PANEL CONNECTION DELIVERY HOSE ARRANGEMENT • Place the supplied rubber washer (17) inside the hex nut on the other end of the clear hose (15) (beverage delivery line) and attach to shank protruding from the door panel • Insert the clear hose (15) (delivery hose) into the hose routing clips (8) attached to the door panel. Once the hoses are properly secured, the CO2 canister valve can now be opened.
• With the canister valve still in closed position, reattach the regulator to the new canister using an adjustable wrench. Tighten nut until it feels snug but be careful not to over tighten as you will damage the gasket inside the stem nut. • Check to make sure that the red gas line hose is still securely attached to the regulator. • Open the canister valve all the way by turning counter clockwise until it stops. This valve seals at both the fully open and fully closed positions.
BEER STORAGE TEMPERATURE OPTIONAL CASTER KIT • Draft beer is not pasteurized, so it must be kept cold, preferably at 38ºF. Temperatures above 38ºF may cause the beer to become wild, turn sour and cloudy. If you’d like to make your beverage cooler so it can be rolled from room to room, there is an optional caster kit available from your authorized Frigidaire dealer or service center.
• Remove the coupler from keg by rotating it counterclockwise. • Remove the red hose (gas line) from the coupler. Make sure the canister valve and regulator shut-off valve is shut off before removing the hose. • Remove the faucet from the shank assembly by turning the threaded stainless steel collar clockwise using a faucet wrench. • Disassemble the faucet parts and place in the cleaning solution bucket.
BEVERAGE COOLER WARRANTY Your beverage cooler is protected by this warranty WARRANTY PERIOD THROUGH OUR AUTHORIZED SERVICERS, WE WILL: THIS CONSUMER WILL BE RESPONSIBLE FOR: FULL ONE-YEAR WARRANTY One year from original purchase date Pay all costs for repairing or replacing any parts of this appliance which prove to be defective in materials or workmanship. Costs of service calls that are listed under NORMAL RESPONSIBILITIES OF THE CONSUMER.
TROUBLESHOOTING GUIDE Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. PROBLEM CAUSE CORRECTION • Beverage cooler is plugged into a circuit that has a ground fault interrupt. • Temperature control is in the “OFF” position. • Use another circuit. If you are unsure about the outlet, have it checked by a certified technician.
SOUND AND NOISE (Cont.) Vibrating or rattling noise. • Beverage cooler is touching the wall. • Move beverage cooler slightly away from the wall. Snapping sound. • Cold control turning beverage cooler on and off. • This is normal. WATER / MOISTURE / FROST INSIDE BEVERAGE COOLER Moisture forms on inside of beverage cooler walls. • Weather is hot and humid. • This is normal. • Door may not be seating properly. • See “DOOR PROBLEMS” Section. • Door is kept open too long or opened too frequently.
3 Ways To Contact Us! ¡3 formas de contactarnos! 3 façons de nous contacter ! USA, EE.UU., É.-U. 1-800-944-9044 CANADA, CANADÁ 1-866-213-9397 (English) 1-866-294-9911 (Français) Or, O, Ou USA, EE.UU., É.-U. Electrolux Home Products, Inc. P.O. Box 212378 Augusta, GA 30917 CANADA, CANADÁ Electrolux Canada Corp. 6150 McLaughlin Road Mississauga, Ontario L5R 4C2 Or,O, Ou Visit Frigidaire’s Web Site At: Visite la página de Frigidaire en Internet: Visitez le site Internet de Frigidaire au : http://www.