Manual

ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven, For satisfactory use of your oven, become familiar with the various
functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This
doesn't change the way it operates.
Note: The oven function will not work if the time of day clock isnot set.
Oven interior Cook Time Up and Down arrow pads- Used along ADD 1 MINUTE PAD Used to add 1 minute
Light Pad- Pad-Used to with the function pads to select oven [otheTimerCountdown Th[sfeatureworks
Used to turn Clock Pad- enter thelength temperature, cooking time, start time withtheKkchenTimeronlyanddoesnot
oven interior Used to set the of the baking (when programming an automatic start alfectanycooktimeorstarttimefunctions.
hght ON and timeofday. \\ time. , time),timeofday, c[ean time and minute // BakePadUsedtoenter
OFF. _f _ _ timer. \ / / thenormal baking mode
_ _ \\ / / ,emperature.
Feature indicator "_ @ \\ / @/ o Broil Pad- Used to
lights- These light I _ \\ Aii'd select the variable
show which , _ (_ (_ ; _olcTime _ _ M._o..........
_,p_de \\ "" u- e_re _lli_ broil function.
feature is in us_ _q. ...... c_._o., _ \\,,o, _ ..j
. Warm _ Ho'd Pad-Select @ @
Clean Pad ...... .... .,,_ Used to set the Keep
SeJect Clean Time< •
Oa art ; Fo_ Ga_a.d Warm feature.
Used to _et_ a M_._t_,_ D_.,'P_
Preheat /
self-selectthe °_..... 7[# ® _'o<eW,rouiH_eO°°re'ech'_eL°ck_d_ ??F_.LM°'°_L0ok ......................................Stop Pad- Used to
cleaning /
cycle.
/
Timer Pad- Used to
set or cancel the
minute timer. The
minute timer does not
start or stop cooking.
/
Delay Start Pad- Used
to set the desired start
time for baking. Can be
used with BAKE TIME
to program a delayed
bake cycle.
Oven, Preheat & Lock lights- The "oven" light indicates
that the oven isfunctionning. The "Preheat" lightwill glow
when the oven is first set to operate, or if the desired
temperatu re isreset higher than the actual oven ternperature.
The "Door Locked" light will flash until the door locks when
the serf-clean cycle is in use. It glows constantly after the door
locks (some models).
clear any function
previously entered
except the time of day
and minute timer.
Push Clear pad to
stop cooking or
enable the oven
lockout feature.
The oven can be programmed to:
Bake normally, Keep warm, Time Bake,Delayed Timed Bake (delayed start), Broil and Clean.
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad ispushed, ff desired, the controls can be programmed for silent
operation.
To te[[ if your oven is set for normal or silent operation push and hold START TIME or DELAY START pad for 7 seconds. "- -" or
"SP" appears in the display. Within Bseconds, pressthe UP or DOWN ARROW pad to switch between normal sound operation
and silent operation mode. The display wi[[ show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: if "SP" appears, the control wi[[ operate with normal sounds and beeps. If "- -" appears, the control isinthe silent operation
mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control isset to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for
any temperature from I70% to 550% (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
I. Pressand hold BROIL pad for 7 seconds until °F or °C appears in the display.
2. Pressthe UP or DOWN ARROW pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press CLEAR/OFF or STOP pad to accept the changes.