Installation guide

Installation Instructions

I-_ DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Plate positionmbeneath flat bottom

cabinet

Plate positionmbeneath framed recessed

cabinet bottom

Mounting Plate Tabs

g the Cabinet Bottom

MountingPlateTabs

Touchingthe BackFrame

At least 30" (76.2 cm),

up to 36" (91,4 cm)

30"(76.2cm)

to Cooktop

Plate position_beneath recessed bottom

cabinet with front overhang

MountingPlatewith

TabsBelowCabinet

Bottomthe Same

Distanceas the Front

OverhangDepth

30"(76.2 cm)

to Cooktop

Your cabinets may have decorative trim that

interferes with the microwave installation. Remove

the decorative trim to install the microwave properly

and to make it level.

THE MICROWAVE MUST BE LEVEL.

Use a level to make sure the cabinet bottom is level.

If the cabinets have a fl'ont overhang only, with no

back or side fl'ame, install the mounting plate down

the same distance as the fl'ont overhang depth. This

will kee t) the microwave level.

[]Measure the inside depth of the fl'ont overhang.

[]Draw a horizontal line on the back wall an equal

distance below the cabinet bottom as the inside

depth of the fl'ont overhang.

[] For this type of installation with fl'ont overhang only,

align the mounting tabs with this horizontal line, not

touching the cabinet bottom as described in Step D.