This USE & CARE MANUAL instructed in this provides specific USE & CARE MANUAL. may occur. Common sense operating These and caution instructions instructions must be practiced are not when for your model. meant to cover installing, this air conditioner contains a current detection device designed to reduce the risk of fire. Prevent air conditioner condition maintaining only as and situation that any appliance.
CAUTION. I Avoid Injury or damage to the unit or other o Provide units o occasional run ventilation during use. Do not direct airflow at fireplaces or other heat related property sources as this could cause flare ups or make excessively. Do not climb Do not hang on or place objects on outdoor objects off the unit. part of the unit. Do not place containers with liquids on the unit.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Packaging Remove all packaging from inside the carton, inserts placed into the side louvers, along with any LJ \ PACKAGING Normal
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING; YOU WILL SEE; Note: Tap or hold either up( A ) or down( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 16 °C (60 °F) and 32 °C (90 °F). If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on Page 7.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE: temp/timer retool tamp/timer lautc energy saver fan only hi to coot auto energy DO THIS: saver mfan only lhi to PRESS MODE BUTTON Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer.
Operating Instructions (continued) TO CHANGE TEMPERATURE DISPLAY: YOU WILL SEE: DO THIS: temp_timer temp/timer cool PRESSAND HOLD THE UP/DOWN BUTTONS TOGETHER FOR 3 SECONDS auto menergy saver mhi fan only cool auto menergy saver mhi #n only lo lo Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
Care and Cleaning Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filter can build up and cause an accumulation of frost on the cooling coils. • Remove filter by sliding out from the right side. • Wash the filter using liquid dishwashing detergent and warm water.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship ormaterials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker. Control is OFF.
Yourappliance iscovered bya limited one-year warranty anda limited2-5yearwarranty onthesealed system (thecompressor, condenser, evaporator andtubing). Foroneyearfromyouroriginal dateofpurchase, Electrolux willpayallcostsforrepairing or replacing anypartsofthisappliance thatprove tobedefective inmaterials orworkmanship whensuchappliance isinstalled, usedandmaintained inaccordance withtheprovided instructions.