FRIGIDAIRE iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ _ iii¸/im Product ackaging .
This USE & CARE MANUAL instructed in this provides specific USE & CARE MANUAL. may occur. Common sense operating These and caution instructions instructions must be practiced are not when for your model. meant to cover installing, this air conditioner contains a current detection device designed to reduce the risk of fire. Prevent air conditioner condition maintaining only as and situation that any appliance.
CAUTION. I Avoid Injury or damage to the unit or other o Provide units o occasional run ventilation during use. Do not direct airflow at fireplaces or other heat related property sources as this could cause flare ups or make excessively. Do not climb Do not hang on or place objects on outdoor objects off the unit. part of the unit. Do not place containers with liquids on the unit.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Packaging Remove all packaging from inside the carton, inserts placed into the side louvers.
Air Conditioner CLEAN AIR FEATURE (some models) -- Features ELECTRONIC CONTROL REMOTE TEMP SENSING INDICATOR (some models) Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING: YOU WILL tamp/timer tamp/timer remote sensing V med hi [] fitter reset auto Zo ON=OFF A FAN SPEED steep PRESS A TO RAISE PRESSV TO LOWER FAN SPEEDS: V v A fitter hi [] med auto Zo reset FAN SPEED sleep SEE: tamp/timer auto c ON-OFF ON=OFF YOU WILL ternp/timer remote sensing c | remote sensing Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL f ctearl air _ \ timer SEE: temp/timer m cool econ #n only temp/timer dean air remote sensing MODE V ON-OFF A \ timer cool m remote econ [] iononly sensing MODE V 0N-0FF some models. PRESS MODE BUTTON (Remember to open the vent during FEATURE: prefer. (Except During this function, "Auto Fan"). the display will show the actual temperature, mode. not the set temperature YOU WILL SEE: timer \ \ M
Operating Instructions (continued) TIMER: YOU WILL SEE HOW MUCH TIME IS CHOSEN; DELAY STOP / START FEATURE f ctearl _ k air timer temp/dmer = cool econ fan only remote sensing dean air Hr econ i [] fan coolonly Hr [] MODE \ temp/timer remote sensing V 0N-0FF \ timer v MODE ON-OFF A THEN DO THIS: FI RST DO THIS: PRESS TIMER BUTTON PRESS UP/DOWN BUTTONS Note: For Delay Stop, the unit must be in the On position. Note: For Delay Start, the unit must be in the Off position.
Operating Instructions (continued) REMOTE SENSING FEATURE (on some models). LIGHT o pulsing cool econ dean air PRESS REMOTE SENSING DO THIS: START BUTTON Q o remote sensing ). | C #n only TEMp/TIMER _ ( On & Off intermittently timer MODE V ON-OFF A remote 5e.sing NOTE: Unit display shows the set temperature __J NOTE: Remote is actual Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling at remote mode.
Operating Instructions (continued) TO TURN YOU WILL UNIT OFF: SEE; temp/timer remote sensing V hi. reed auto Io ON-OFF A J FAN SPEED fitter reset sensing remote s[eep V Itemp/timer I ON-OFF /% med hi lo auto fi[ter reset l FAN SPEED s[eep oo_ j PRESS ON/OFF BUTTON THINGS ADDITIONAL YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
Care and Cleaning Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter necessary. should Trapped be checked particles of frost on the cooling • • • • Push the Open the Grasp the Wash the When is coils. Gently shake excess water from the filter. Be sure filter dry before replacing of washing, you may vacuum the filter clean. replacing filter are on the upper on the left side.
Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker. Control is OFF.
Yourappliance iscovered bya limitedone-year warranty anda limited2-5yearwarranty onthesealed system (thecompressor, condenser, evaporator andtubing).Foroneyearfromyouroriginal dateofpurchase, Electrolux willpayallcostsforrepairing or replacing anypartsofthisappliance thatprovetobedefective inmaterials orworkmanship whensuchappliance isinstalled, usedandmaintained inaccordance withtheprovided instructions.
