FRIGIDAIRE Packac Air Conditioner Feai i¸ Www:fdgidaire:€om ;;::L ; L [L800_265_8352 :
ThisUSE&CARE MANUAL provides specific operating instructions foryourmodel. Usetheroomairconditioner onlyas instructed inthisUSE & CARE MANUAL. These instructions arenotmeanttocovereverypossible condition andsituation that mayoccur. Common sense andcaution mustbepracticed wheninstalling, operating, andmaintaining anyappliance.
Product Registration Record Your Hodei and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No, Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you CLEAN AIR FEATURE (some models) -- REMOTE TEMP desire. The unit can be controlled SENSING INDICATOR DISPLAYS (some models) __ TEMPERATURE/TIME T clean _ \ • I a,r \ timer cool remote _ econ sensing _ .
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING; YOU WILL temp/timer temp/timer remote sensing V mm 0N=0FF "_ A hi, fitter med auto lo i FAN SPEED steep V FAN SPEEDS: YOU WILL temp/timer A fitter J reset FAN SPEED steep SEE= temp/timer hi, fitter reed auto lo ON-OFF ON=OFF hi , med auto lo Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE: ternp/timer dean air timer _ \ [] cool econ temp/timer mm remote sensing fan only MODE V 0N-0FF A air timer FEATURE: | remote sensing cool econ ,fanon@ MODE V ON-OFF A DO THIS: CHOOSE ECON SLEEP FEATURE; econ sensing . #n only V (Remember m ON-OFF A to open the vent during but keep it closed during cooling efficiency.) prefer. During (Except "Auto Fan").
Operating Instructions (continued) TIMER: YOU WILL DELAY STOP J START FEATURE SEE HOW MUCH TIME IS CHOSEN: ternp/timer c[earl _ [] cool econ \ air Ian only temp/timer | remote sensing Hr dean air \ v ON-OFF A THEN DO THIS: DO THIS; PRESS UP/DOWN BUTTONS PRESS TIMER BUTTON For Delay Stop, the unit must be in the On position. Note: For Delay Start, the unit must be in the Off position. First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow at 0.
Operating Instructions (continued) REMOTE SENSING FEATURE (on some models). LIGHT pulsing ( On & Off intermittently ). temp/timer _L dean air DO THIS: PRESS REMOTE SENSING timer econ coot onty Ion sensing remote MODE m C V ON=OFF A START BUTTON NOTE: Unit display shows the set temperature NOTE: Remote display is actual temperature Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling mode.
Operating Instructions (continued) TO TURN YOU WILL UNIT OFF: SEE; temp/timer remote sensing V hi, reed auto Io ON=OFF A ) FAN SPEED PRESS DO THIS; ON/OFF BUTTON remote fitter reset sensing steep V hi reed |auto lo temp/timer ON=OFF A fitter reset i FAN SPEED steep I ADDITIONAL THINGS YOU SHOULD KNOW Now thatyou have masteredthe operatingprocedure,hereare more featuresinyourcontrolthatyou shouldbecome familiar with //_ • \ preventscircuit overheating of the compressor •
III Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Care and Cleaning Air Filter Cleaning The air filter should be checked necessary. particles Trapped of frost on the cooling Push the • Open the • Grasp the • Wash the at least once a month in the filter can build to see if cleaning up and cause is an accumulation coils. vent handle to the Vent Closed position(where applicable). front panel.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship or materials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Plug Current House fuse blown Control Air from unit does not feel cold enough. Device Push plug firmly Tripped. Press the or circuit breaker is OFF. Turn Control Room temperature below into wall outlet. RESET button. tripped.
Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.