User Manual

9
TIMER
While the unit is on, press this button to enable the auto-shutoff
feature. Keep pressing the button to cycle through the timer
options, 1, 2, 4 or 8 hours. Once the selected time has completed,
the unit will shut off.
EVAPORATIVE COOLING
While the unit is on, press this button to enable evaporative
cooling. Please note that in order for evaporative cooling to
work, the water tank must be filled in between the min and
max fill lines. Remove the tank from the back of the unit and
replace it once the water has been filled. Pressing this button
will turn on the water pump, which will run water through the
cooling pad on the back of the unit, cooling the air coming into
the unit, and thus cooling the air coming out of the front of the
unit.
To make the air even colder, drop the included ice packs into the
water tank. (Do not break open or modify ice packs in any way—
ice packs already contain a freezing gel and do not need to be
opened. Place ice packs in the freezer overnight prior to use, for
maximum cooling effect. Frozen ice packs should be placed
directly into the water tank, on top of the icon labeled “ice box.”
Ice packs should only be placed on the “ice box” icon, or they
might obstruct or damage the water pump.)
The water pump will automatically shut off after 10 hours of
operation.
To disable the evaporative cooling feature (and return to fan-
only mode), just press the evaporative cooling button again.
MODE
While the unit is on, it will be in normal mode by default. Press
this button again to switch to nature mode, a second time to
switch to sleep mode, and a third time to switch back to normal
mode. In normal mode, the fan operates at a fixed speed set by
the user with the fan speed button (see below).