Installation Guide

How to start the unit
1. Take out the water reservoir on the top, place the bottom up, open the cap, pour potable water into
water reservoir, 0.97 gallon (3.7 liters) water at most at one time. Screw the cap on to the reservoir,
and put it back on the top of the appliance again.
2. Before you put back the drawer, please make sure the water tank under the drawer is empty，if is not,
unplug water drain cap to drain out water completely.
3.
4.
Put the drip tray in position.
Add water, screw the cap
and put it back.
Open the cap
Operation and display areas
Plug in the power cord, the power indicator is on: you can operate this appliance by touch the
button on panel as shown above, the main function includes: ice, clean, UV and light.
CLEAN
For the first time, or the clean procedure has not been ran for a long time, it is highly recommended
t
Before starting the cleaning process, please check the drain pipe and drain pipe plug on the back of the
machine. Be sure to plug the drain pipe with a drain pipe plug and hang it on the back of the machine.
o run this procedure at first.
USING YOUR ICE MAKER
6