÷ THIS AIR CONDITIONER STANDARD IS EQUIPPED WITH A NEW INDUSTRY POWER SUPPLY CORD WITH A TEST-RESET FUNCTION ÷ ÷ READ AND SAVE THESE INSTRUCTIONS MULTi-STEP SPEED ELECTRONIC CONTROL P/N 220202d019 SZ000400(En)-Yaokong 1 _ 12/10/2004, 5:36 PM
ROOM AIR CONDITIONER Yourproduot is proteoted WARRANTY by this warranty Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
Important Safety Instructions Read aiminstructions before using this air conditioner. For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance= Read product labels for flammability and other warnings= The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section 'Operation of Current Device' for details.
To reduce the risk of fire, electric shock, or injury to persons, SAFETY INSTRUCTFONS Operation Device of Current read the FMPORTANT before operating this appliance. The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out. 3. Press the RESET button.
Air Conditioner NOTE: The following instructions represent the Unit Controls, instructions can be used for the Remote Control, Features the same (continued) TO TURN YOU WILL SEE: UNIT ON: F TO CHANGE TEMPERATURE SETTING: YOU WILL SEE: Note: Tap or hold either up( A ) or down( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60°F (16°C) and 90°F (32°C). If you want the display to read the actual room temperature.
AIr Conditioner Features (continued) TO USE AUTO COOL FEATURE: YOU WILL SEE: //_Not __p RDO THIS: ESS AUTO COOL BUTTON _ii ¸¸_ ,_- I? © @ © @ LIGHT On e: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn't get too warm, it will stay at the slowest speed, if the room temperature rises quickly, such as a door being opened, it wi[I automatically go to the highest speed.
Air Conditioner Features (continued) TIMER: DELAY STOP ! START YOU WiLL FEATURE SEE: TIMER SETTmNG S /_Not LIGHT On e: For Delay Stop, the unit must be in the On position, Note: For Delay Start, the unit must be in the Off position. PRESS DO THIS: TIMER BUTTON To adiust timer setting, tap or hold the UP arrow(A) or the DOWN arrow(V) to change delay timer at .5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours.
Air Conditioner Features (continued) CHECK FILTER FEATURE: YOU WILL SEE: __CNaOtreLIG HT On : This feature is a reminder to clean the Air Filter (See e and Cleaning) for more efficient operation, The LED (light) wilJ iliuminate after 250 hours of operation, To reset after cleaning the fiJter, press the "Check FJJter"button and the JJght will go off, © © © Q _b \ J TO TURN UNiT OFF: DO THIS: 1! PRESS ON/ OFF BUTTON SZ000400(En)-Yaokong 9 12/10/2004, 5:36 PM
÷ Air Conditioner Features (continued) ADDITmONAL THroNGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your controi that you should become familiar with, • The "Cool "circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly= This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
÷ Care and C eaning Clean your air conditioner occasionally to keep it Iooking new, Be sure to unplug unit before emeaning to prevent shock or fire hazards.
÷ Avoid Service Checklist OCCURRENCE Air conditioner Before calIing for service, review this list, Htmay save you time and expense, This list includes common occurrences that are not the result of defective workman-ship or materials in this appliance, SOLUTION will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.
