÷ THIS AIR CONDITIONER STANDARD IS EQUIPPED WITH A NEW INDUSTRY POWER SUPPLY CORD WITH A TEST-RESET FUNCTION ÷ ÷ READ AND SAVE THESE INSTRUCTIONS P/N 220204d031 SZ000355(En)-JiXie(3) 1 _ 10/25/2004, 5:44 PM
÷ ROOM AIR CONDITIONER Yourproduot is proteoted WARRANTY by this warranty Your appliance is warranted by Elsctrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
÷ Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
÷ important Safety instructions Read aiminstructions before using this air conditioner. For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section 'Operation of Current Device' for details.
÷ To reduce the risk of fire, electric IMPORTANT SAFETY INSTRUCTIONS Operation Device of Current shock, or injury to persons, read the before operating this appliance. The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out. 3. Press the RESET button.
÷ Air Conditioner Features Air Directionam Louvers Air directionar !ouvers control air flow direction. Your air conditioner has the louver type described below. (:continued) Auger Type The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheels until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained.
÷ Care and C eaning Clean your air conditioner occasionally to keep it Iooking new= Be sure to unplug unit before cmeaning to prevent shock or fire hazards.
÷ Avoid Service Checklist OCCURRENCE Before calIing for service, review this list. it may save you time and expense. This list includes common occurrences that are not the result of defective workman-ship or materials in this appliance. SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.
