USE & CARE MANUAL THISAIR STANDARD CONDITIONER IS EQUIPPED WITH A NEW INDUSTRY POWER SUPPLY CORD WITHATEST-RESET FUNCTION READAND SAVE THESE INSTRUCTIONS !"HRU- HE-WA AIR CONDITIONER 3 SPEED ELECTRONIC CONTROL P/N:819042072-01
ROOM AIR CONDITIONER Your product is protected WARRANTY by this warranty Yourappliance is warranted by Electrolux, Electroluxhas authorized FrigidaireConsumer Services andtheir authorized servicersto perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Product Registration Record Your Modeland Serial Numbers Record in thespace provided belowthe model andserial plate is located on the outsideof the cabinet. numbers. Onall models, theserial Model Number Serial Number Register Your Product The self-addressed PRODUCT REGISTRATION signed and returnedto the FrigidaireCompany. Contents NOTE: This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL.
Read all instructions Important Safety Instructions The power supplycord with this air conditioner contains a current detection device designed to reduce the risk offire. Please referto the section 'Operation of Current Device'for details. Intheeventthatthe power supply cord is damaged, itcannot be repaired it must be replaced with a cord from the Product Manufacturer. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
To reduce the risk of fire, electric shock, orinjury to persons, IMPORTANTSAFETY INSTRUCTIONS before operating thisappliance. i he power supplycord Operation of Current Device contains acurrent device thatsenses damage tothe read the power cord. To test your power supply cord dothe following: 1. PlugintheAirConditioner. 2. Thepower supplycordwillhaveTWO buttons onthe plug head. Press theTEST Youwill notice aclick as theRESET button pops out. 3. Press theRESET button.
Air Conditioner Features NOTE: The following instructions represent theControl instructions can beused for theRernote Control.
Air Conditioner Features (continued) TO USE AUTO COOL YOU WILL SEE: FEATURE: ON )f NOTE: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates, For example if the room does not get too warm, it will stay at the slowest speed, If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed, The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature, Press the fan button
Air Conditioner Features (continued) TIMER: DELAY STOP/START YOU WILL SEE: FEATURE: LIGHT DO THIS: PRESS TIMER BUTTON THEN PRESS DOWN ON NOTE: For Delay Stop, the unit must be in the ON position. NOTE: For Delay Start, the unit must be in the OFF position. To adjust timer setting, tapor hold theUP arrow(<_ ) orthe DOWN arrow(_) to change delay timer at .5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.
Air Conditioner Features (continued) YOU WILL SEE: NOTE: This feature can be Timer, or Sleep Modes, When while heat is needed, The anywhere between 60°F(15°C) is satisfied, the fan will cycle air, DO THIS: PRESS MODE BUTTON SELECT HEAT TO TURN UNIT YOU WILL SEE: OFF: ii DO THIS: PRESS ON/ OFF BUTTON used with any combination of FAN Speeds, in the Heat Mode, the fan will run continuously temperature will automatically be maintained and 90°F(32°C), When the room settemperature off and on to circula
Air Conditioner Features (continued) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have masteredtheoperating procedure, herearemorefeaturesinyourcontrolthatyoushould become familiar with. • The "Cool" circuit has anautomatic 3 minutetime delayed startif the unitis turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
Avoid Service Checklist OCCURRENCE Air Before calling forservice, review this list. It may save you timeand includes common occurrences that are not the result of defective materials in thisappliance SOLUTION conditionerwill notoperate. Wall plugdisconnected. Current device House circuit tripped. fuse blown breaker. Control is OFR Unit turned Push plugfirmly Preset RESET or circuit breaker Turn control off and thenon into walloutlet. button. tripped. On andset too quickly.
