R'SGUI READ AND SAVE THESE INSTRUCTIONS THRU-THE-WALL AIR CO DITIO ELECTRONICCONTROL P/N 309000856 (11/03)
ROOM AtR CONDITIONER Your product is protected WARRANTY by this warranty Your appliance is warranted by Electrolux. Electlolux has authorized Frigidaire Consumer Services and their authorized servicers to peutorm service under this war ranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty.
Product Registration Record Your Mode[ and Serial Numbers Record in the space provided below the model and serial numbers, On most models, the serial plate is located on the outside of the cabinet, Or] some models, remove the filter and look at the bottom edge of the air conditioner behind the front grille for the model and serial numbers, Reading these numbers may be easier by using a flashlight or by removing the cabinet front as instructed under "Care and Cleaning," Model No, Serial No, Register
important Safety instructions Read a[[ instructions before using this air conditioner. For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any,other appliance, Read product labels for flammability, and other warnings.
NOTE:If the air conditioner is turned or the temperature is changed setting then back to a higher will shut off, Wait before compressor the for the will pressure off 3 minutes restart, this inside the compressor to equalize_Failure minutes may cause inefficient to wait 3 operation when adjusting the temperature will continue to run, Air Conditioner the IMPORTANT SAFELYINSTRUCTIONSbefore operating this applian(;e, to a lower setting the compressor allows Toreducetheriskof fire,electrics
Air Conditioner Features (continued) YOU WiLL SEE: TO TURN UNiT ON: DO THIS: PRESSON/OFF BUTTON TO CHANGE TEM PERATURE SETTING: YOU WILL SEE: DO THIS: TO RAISE TO LOWER Note: Tap or hold either up( A ) or down(v) button until the desired temperature is seen or] display. This temperature will be automatically maintained anywhere between 60F (16C) and 90F (32C) for cooling mode. The Temperature will be automatically maintained anywhere between 55F (13C) and 80F (27C) for heating mode.
Air Conditioner Features (continued) TO OPERATE Off[ FAN ONLY: YOU WiLL SEE: DO THIS: PRESS MODE BUTTON CHOOSE FAN ONLY Note: Use this function only when cooling is not desired, such as for room air circulation. You can choose any fan speed you prefer, EXCEPTAUTO FAN. During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
Air Conditioner Features (continued) YOU WiLL SEE: SLEEP FEATURE: DO THIS: PRESSSLEEP PAD The Sleep Mode can be selected with a Heating or Cooling Mode, Note: In this "MODE" the selected cooling temperature will increase by 2 degrees F, ._0 minutes after the mode is selected, ]he temperature will then increase by another 2 degrees F,after an additional .
Air Conditioner Features (continued) TO TURN YOU WILL SEE: UNIT OFF: DO THIS: PRESSON/OFF BUTTON ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should know. , The Remote Control will operate all the control panel features, follow the same instructions. , The "Cool " circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
Air Conditioner Features 4-Way Air Directionam Louvers The 4&PTay air directional louvers allow you to direct air flow up or down, left or right throughout the room as needed, To adjust the air directional louvers side-toside, use the center handle as you move it side-to-side, (continued) (4-WAY) Care and Cleaning Clean your air conditioner occasionally to keep it looking new, Be sure to unplug the unit before cleaning to prevent shock or fire hazards.
Avoid Service Checklist Beforecallingforservice, reviewthislist,It maysaveyoutimeandexpense, This _ist includes common occurrences that are not the result of defective workmanship or materials in this applian_:e. OCCURRENCE Air conditioner SOLUTION will not operate. Wall plug disconnected. House fuse blown breaker, Control or circuit breaker is OFF, Turn Control Unit turned restart, Thermostat Air from unit does not feel cold enough, Push plug firmly off and then into wall outlet.
