USE & CARE MANUAL THISAIR STANDARD CONDITIONER IS EQUIPPED WITH A NEW INDUSTRY POWER SUPPLY CORD WITHATEST-RESET FUNCTION READAND SAVE THESE INSTRUCTIONS AIR CONDITIONER 3 SPEED ELECTRONIC CONTROL P/N819042059-01
ROOM AIR CONDITIONER Your product is protected WARRANTY by this warranty Yourappliance is warranted by Electrolux. Electroluxhas authorized FrigidaireConsumer Services andtheir authorized servicersto perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Product Registration Record Your Modeland SerialNumbers Record in the space provided below the model serial plate islocated on theoutside of thecabinet. andserialnumbers. Onallmodels, the Model Number Serial Number Register Your Product The self-addressed PRODUCT REGISTRATION siqned and returnedto the FriqidaireCompany. Contents NOTE: This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL.
Read all instructions Important Safety Instructions The power supplycord with this air conditioner contains a current detection device designed to reduce the risk offire. Please referto the section 'Operation of Current Device' fordetails. Intheeventthatthe power supply cord is damaged, itcannot be repaired it must be replaced with a cord from the Product Manufacturer. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug.
To reduce the risk of fire, electric shock, orinjuryto IMPORTANTSAFETY INSTRUCTIONS before operating thisappliance. Operation Device persons, The powersupplycord contains acurrent device thatsenses damage to the power cord. Totest your powersupply cord dothe following: 1. Plug inthe AirConditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. Youwill notice aclick as theRESET button pops out. 3. Press theRESET button.
Air Conditioner (continued) NOTE: The followinginstructions represent theControl the same instructionscan be usedfor the RemoteControL Features TO TURN UNIT ON: Panel, YOU WILL SEE: DO THIS: PRESS ON/ OFF PAD TO CHANGE SETTING: YOU WILL SEE: TEMPERATURE NOTE: Tap or hold either the desired temperature PRESS TO _______ temperature between RAIS DO THIS.
Air Conditioner features (continued) TO USEAUTO COOL YOU WILL SEE: FEATURE: / LIGHT ON NOTE: Fan starts at High Speed and adjusts toaslower speed as the room temperature dictates. For example if the room does not get too warm, itwill stay atthe slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
Air Conditioner features (continued) TIMER: DELAY STOP/START FEATURE: YOU \ THEN DO THIS: PRESS UP ( _ ) OR DOWN (_)BUTTON SLEEP LIGHT DO THIS: PRESS TIMER BUTTON FEATURE: FILTER ON NOTE: For Delay Stop, the unit must be in the ON position. NOTE: For Delay Start,the unit mustbe in theOFF position. To adjust timer setting, tap or hold the UP arrow(,_ ) or the DOWN arrow(_ ) to change delay timer at 5 hour increments, up to 10 hours, thenat 1 hourincrements up to 24 hours.
Air Conditioner (continued) features TO TURN UNIT OFF: YOU WILLSEE: DO THIS: PRESS ON/ OFF BUTTON ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. • The" Cool" circuit has anautomatic 3 minutetime delayed startifthe unitis turned offand onquickly. This prevents overheating of thecompressor and possiblecircuit breaker tripping. The fan will continue torun during thistime.
Care and Cleaning: Clean your air conditioner occasionally to keep it looking Be sure tounplug the unit before cleaning toprevent shock or fire hazards: new. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filtercan build up and causean accumulation offrost onthe cooling coils. • Grasp the filter by the centerand pull upand out. • Wash the filter using liquid dishwashing detergent and warm water. Rinse filter thoroughly.
Avoid Service Checklist Before calling forservice, review list includes common occurrences or materials inthis appliance OCCURRENCE will not Wall plug disconnected. Current device tripped. Push plugfirmly into walloutlet. Preset RESET button. House fuse blown or circuit reset circuit breaker. Control Unit does not feel is OFR Turn control breakertripped. On andset turned off and on too quickly. Room temperature below temperature rises above60°F Temperaturesensor from coil.
