OWNER'SGUIDE READ AND SAVE THESE INSTRUCTIONS AIR CONDI lONER ELECTRONICCONTROL P/N 309000834 (10/99)
ROOM AIR CONDITIONER Your product is protected WARRANTY by this warranty Your appliance is warranted by White Consolidated Industries, Inc. WCI has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. WCI authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On most models, the serial plate is located on the outside of the cabinet. On some models, remove the filter and look at the bottom edge of the air conditioner behind the front grille for the model and serial numbers. Reading these numbers may be easier by using a flashlight or by removing the cabinet front as instructed under "Care and Cleaning." Model No. Serial No.
Important Safety Instructions Read all instructions before For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. Prevent V.t_rAVl__W N _ I I_ [9 Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
Some models are shipped in a removable sleeve, please follow the supplied Installation Instruction before installing the Decorative front and accessories. Front Installation Installing the Vent Control (on some models) The vent control handle is included in the decorative front kit. The handle must be installed before the decorative front is attached. 1. Insert the handle with the "etchings (Vent/Air)" facing to the left. 2. Slip the black door extension into the split at the end of the handle. 3.
V.t_vAvl__y N _ I I_ [9 To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONSbefore operating this appliance. Using Air Conditioner To begin operating the air conditioner, follow these steps: 1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension cord or an adapter plug.) 2. Set the exhaust vent to the CLOSED position. 3. Adjust the louvers for comfortable air flow.
Air Conditioner Features (continued) STEP 2 -- TO CHANGE TEMPERATURE SETTING: YOU WILL SEE: DO THIS: PRESSTO RAISE TO LOWER Note: Tap or hold either up(^) or down(v) button until the desired temperature is seen on the screen. This temperature will be automatically maintained anywhere between 60F (15C) and 90F (32C). If you want the display to read the actual room temperature, see step 5.
Air Conditioner Features (continued) STEP 5 m TO OPERATE ON FAN ONLY: YOU WILL SEE: DO THIS: PRESSON (if not running) PRESS FAN ONLY ONE Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Note: The "AUTO" setting will not operate in FAN ONLY.
Air Conditioner Features (continued) STEP 8 m TO INCREASE DELAYED START TIME: YOU WILL SEE TIME CHOSEN: DO THIS: PRESS Note: Tap or hold the UParrow(^) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The unit will then come on in Cool and HI fan mode. The temperature maintained will be the same as you previously set.
Air Conditioner Features (continued) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. • Remote control works exactly like the control panel, follow the same instructions. • The "Cool " circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping.
Air Conditioner Features (continued) Air Directional Louvers Air directional louvers control air flow direction. Your air conditioner has one of the louver types described below. 4-Way Louvers The 4-Way air directional louvers allow you to direct air flow up or down, left or right throughout the room as needed. To adjust the air directional louvers side-toside, use the center handle as you move it side-to-side. (4-WAY) Care and Cleaning Clean your air conditioner occasionally to keep it looking new.
Avoid Service Checklist Before calling for service, review this maythe save you of time and expense. This list includes common occurrences thatlist. areIt not result defective workmanship or materials in this appliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected.Pushplug firmly into wall outlet. Batteries in remote may need to be replaced. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker. Unit is in the OFF mode.
