USE CARE NUAL READ AND SAVE THESE INSTRUCTIONS EAVY UTY TIO MULTI-STEP SPEED ELECTRONIC CONTROLS P/N 220218A007
÷ ROOM AIR CONDITIONER Yourproduct is protected WARRANTY by this warranty Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to pedorm service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be pedormed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
÷ Product Registration Record Your Model and Serial Numbers Record in tbe space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Contents NOTE: This USE & CARE MANUAL provides specific operating instructions for your model.
÷ Read all instructions important Safety instructions before using this air conditioner. For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section 'Operation of Current Device' for details.
÷ Air Conditioner Features ELECTRONIC CONTROL OPERATING iNSTRUCTiONS Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit control alone or with the remote.
÷ Air Conditioner Features (continued) TO ADJUST FAN SPEEDS: YOU WiLL SEE (10-99): Temp/_mer DO THIS: ,e,_t_ Terns* PRESS TO SELECT: FASTER Steep S,ower Fa_ _ Check F_l_ Enemy Sav_r A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the "SLOWER" button is pressed the motor speed will slow down at various intervals, down to a minimum setting of 10. To speed the motor up, press the "FASTER" button.
÷ Air Conditioner Features (continued) TO USE THE ENERGY SAVER FEATURE: YOU WiLL SEE: Te_p/_mer DO THIS: PRESS MODE BUTTON _ Sleep Che_k FiJ*_r CHOOSE ENERGYSAVER LIGHT ON Note: In this mode, the fan will continue to run for another 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the the cooling system turns back on.
÷ Air Conditioner Features (continued) CHECK FILTER FEATURE: LIGHT YOU WiLL SEE : ON En_r_]ySaver Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Check Filter" button and the light will go off. LIGHT ON SLEEP FEATURE: To,.
÷ Air Conditioner Features (continued) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. This prevents compressor and possible circuit , quickly. The "Coot " circuit has overheating an automatic of 3the minute time delayed start if the unit breaker is turned tripping. off and The on fan will continue to run during this time.
÷ Care and Cleaning Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filter can build up and cause an accumulation of frost on the cooling coils.
÷ Avoid Service Checklist OCCURRENCE Air conditioner Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workman-ship or materials in this appliance. SOLUTION will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.
