Installation guide

ManualsBrandsFrigidaire ManualsRoom air conditionerOfficial Frigidaire room air conditioner

iNSTALLATIONINSTRUCTIONS

Gatherthe requiredtoolsand partsbeforestartingInstallation. iMPORTANT:Observe all governingcodesand ordinances.

Read and followtheinstructionsprovidedwith any tools listed Checkthe locationwhereair conditJonerwlllbe nstelled.Proper

here. installat_onisyourresponsiblli_j.Make sure youhaveeverythin_

Took; Needed necessaryfor correct,installation.

The locationshould provide:

[] Flat-bladeand Phillips [] Tapemeasure [] Groundedelecl_icaloutietwithin 4 ft(122 cm)ofwhere b_e

screwdrivers [] Drill and _" or smallerbit powercordexitsthe airconditioner.

[] Level NOTE: Donot usean extensioncord.

[] Free movement of air inroomto becooled.

Through.the,Waft Instahtion:

In additionto the toolslisted above,thefollowingtoolsare [] Alarge enoughopeninglor Lheair conditioner,

neededforthrough-the-wallInstalation. [] Adequatewallsupporr.forweight a!air conditioner.Air

[] Saw [] 1" (2,5cm) orthicker conditionerweighsbeLween50 and 60 Ibs [22to 28 kg),

lumber MOTE:Cabinetlouversmust_otbe obstructed.Airmust beable

[] Woadpreservative

[] #10 x 1" wood screws (7) to passfreelythrough thecabinet,louvers.

[] Caulk

Parts SuppFmd(on some models)

Checkthat.all parts are includedinparis package,

C D E F

A. Cebtnet touvers

screws _)

G.Topchannel

O.JlO x _" pan-head H,Sidecurtains(2J

Phillips screws _3) L Fo#m seal

NOTE: Installationparts are suppliedlor double-hungwindows

upto 40 (101.6cm)wide,AspecialWideWindowKit.isavailable

from yourdealeror servicecenter.See "Accessories."

PIN 66129901290 1

Summary of content (8 pages)

PAGE 1
iNSTALLATIONINSTRUCTIONS Gather the requiredtoolsand parts beforestartingInstallation. Read and follow the instructionsprovidedwith any tools listed here. iMPORTANT:Observe all governingcodes and ordinances. Check the locationwhere air conditJonerwlllbe nstelled.Proper installat_on is yourresponsiblli_j.Make sure you haveeverythin_ Took; Needed necessaryfor correct,installation. The locationshould provide: [] Groundedelecl_icaloutietwithin 4 ft(122 cm) of where b_e power cordexitsthe air conditioner.
PAGE 2
Window Installation Window opening measurements: m 22.2" to 40" (56.3 cm to 101.6 cm) opening width, 14"(35.5cm) mm#ni4mopeninghe_gl_L B ! ! A. 22.2" (56.3 cm) minimum e. 14"(355cm) minimum Through,the.Waft lnstafia_n The wall opening measurements should be: [] Width: 19V_(48.4 cm) plus twice thickness of wood used to build frame, [] Height: 13" (35 2cm) plus twice thickness of wood used to build frame. [] Depth: 2_h" (6.4 cm) minimum to 4" (lO.lcm) maximum. B t C A. 13"(35.2cm) B.
PAGE 3
iNSTALLATiON iNSTRUCTiONS Ex_sslw 4L Removethe window lock bracket and screw |rein the air Weight Hazard conditJonerand setaside.(on some models) Use two or mor_ people)to move)and Inee_ll sir _orldltloner. Fmilumto do so €_n result in back or o_herinjury. Remove packagk_g mab_dels [] Removeand disposeof/recyclepackagingmaterials. Removetape and gl-e residuefrom surfacesbeforeturning on the airconditioner.Ruba smallamount-elliquiddish soap over the adhesivewith your lingers.
PAGE 4
NOTES: Bottom view [] Handle the air conditionergently, [] Be sure yourair conditionercabinetdoes not fall out o( the openingduring installationor removal. [] The place wherethe powercord exits the air conditioner shouldbe no more than 4 (t(122 cm) from a grounded 3 prongoutlet [] [] Do not blockthe louvers on the front panel. Do not blockthe louvers on the outsideof the air conditioner, Attach T_ A B A. Curtainhousing Channel B.
PAGE 5
install _binet into Window Attach Side Curtains to _ndow 1, Pullthe left-hand curtainout untilitfits intothe window channel,Use a %2"drillbitto drilla starter holethrough the hole in the curtainhousingand into the lower window sash, [] Handlethe air conditionergently, [] Be sureyour air conditionercabinet does notfall outer the openingduringinstallationor removal. [] The place where the powercord exits the air conditioner should be no more than 4 rt (122 cro)from a grounded 3 prongoutlet.
PAGE 6
Comp_te installation 1, Insert.sealbehindthe Lopof the towerwindowsashand againstthe glassof the upper window, 2, Place the window-lockbracketon top of towerwindow and againstupper window sash. 3, Use a _/_" drillbitto drilla starterholesthroughthe holes in each bracket intothe windowsash 4, Attachthe window-lockbracket to the window sash with #10 x s/4.round-headscrewsto securewindow in place. A A.
PAGE 7
[] Use l" (2.5 cm) or thicker lumberfor woodframe. 2. Use a levelto checkthatcabinetis levelside to side. B :C A A. Level A. Outside width B. Outside height C. Depth 4. Apply the wood preservativeto the outsideexposedsurface, 5. tnsertthe frame in the wa opening,Squareand level frame. 6. Attach frame securelyto the wall Install Cabinet into Wood Frame 1. InserLcabinetintothe framed wall opening,Thetop of the cabinet should extend _/_(19.1 ram) into the room.if there is 3 trim.
PAGE 8
! Electrical Shock Hazard J Connect green ground wire to ground screw. Failure to do so can result in death or electrical 5. tnserttronttabs of frontpanel into top of cabinetand swing front intoplace, 6. Attach bottomIront of panelwith frontpanelscrews, Replace controlknobs{onsome models), shock. 3. Connectgreengroundwire to cabinet basewith groundscrew, Position groundwire pointingstraightup, Putexcess ground wire betweencoil and air conditionercabinet, A. Green ground wire B. Ground screw 4.