User's Manual

12
OPERATING INSTRUCTIONS
Cycle Options
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Some Options require a “Press & Hold” effort
to activate or deactivate the secondary function.
Not all options are available on every model. To protect
your fabrics, not all options are available with every cycle.
If an option is not appropriate for the cycle, the indicator
will not light. Occasionally, a setting and option in the
same cycle will con ict with each other, like Sanitize
temp and Damp dry level. When this happens, the
option selected rst will cause the con icting option to
not be selectable.
Allergy (on select models)
Use this option to reduce allergens as you dry your
load. Not recommended for items prone to heat
damage.
Energy Saver
The Energy Saver option reduces the drying
temperature a few degrees to save energy. In
conjunction with automatic moisture sensors, cycle
times will increase slightly, but overall energy usage will
decrease. On some models, you may also notice after
the cycle begins most lights and indicators will turn off.
To turn those lights temporarily back on press Energy
Saver during the cycle.
Add Steam (on select models)
The Add Steam option injects steam into the clothing
prior to cool down to reduce wrinkling.
Drum Light ( Press & Hold on some models)
The drum light will come on whenever the door is
opened to illuminate the drum during loading and
unloading. Closing the door turns off the light. The
drum light will automatically turn off if the door is left
open more than 3 minutes.
On models with Press & Hold features, you can
activate the drum light during a cycle by pressing and
holding the button under Options with the symbol.
The light will stay on during the cycle for 3 minutes. To
turn it off, press and hold the button again.
Í
NOTE
To change the Options after the cycle starts, press
Pause, adjust the setting and press Start to resume
the cycle.
line
dry
wrinkle
release
delay
start
shrink
guard
anti
static
control
lock
chime
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
line
dry
wrinkle
release
add
steam
delay
start
anti
static
control
lock
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
sanitize
high
normal
low
air dry
max
high
normal
low
damp
line
dry
wrinkle
release
chime
delay
start
shrink
guard
control
lock
ultra capacity