Installation guide

ManualsBrandsFrigidaire ManualsRoom air conditionerOfficial Frigidaire room air conditioner

INSTALLA]]ONINSTRUC]]ONS

Gatherthe requiredtoolsand partsbe|ore starting installation,

Readand followtheInstTuctlonsprovidedwithany toolslisted

here.

Tools Ele_le_l

m Flat-blade and Phillips [] Tape measure

screwdrivers

[] Drillend_/=e"orsrnallerbit

[] Level

Through-the-Wall Installation:

In addition to the toolslistedabove, the [ollowingtoolsare

neededIor through-the-wallinstallation.

[] Saw [] 1" (2,5cm) orthicker

lumber

[] Wood preservative

[] Caulk [] #10x 1" woodscrews (7)

Parts Supplied (on sow==models)

Checkthat all parts ereIncluded Inpartspackage.

C D E F

A. Foam window sash seal

B. [Mndow /oei_brackets {2)

C. #TO x _" pen-head Phillips

SCreWS(6)

D. #lOx _ pen-head

Phillips screws (3)

E. 110 x _" round-head screws (6)

F. #TOx _h" pan-head Phillips

SCreWS (3)

G. Top channel

H.Sidecurtains(2)

LFoamseal

IMPORTANT:Observeallgoverningcodesand ordinances.

Checkthe locationwhereair condltJonerwlllbe Installed.Proper

Installation Isyourresponsibility.Makesureyou haveeverything

necessarylor correctinstallation.

The locationshouldprovide:

[] GroundedelectzicalouLietwiLhin4 ft(122 cm)ofwherethe

powercordexits the airconditioner.

NOTE: Donot usean extensioncord.

[] Freernovementofairinroomtobe cooled.

[] Alargeenoughopeningfor the air conditioner.

[] Adequatewallsupportlorweightol airconditioner.Air

condil_onerweighsbetween94 and 103 Ibs(43to 47 kg),

NOTE: Cabinetlouversmustnot beobstructed. Airmustbeable

topassfreely_reugh _e cabinetlouvers.

A. Cabinet louvers

NOTE: Installationpartsare suppliedfor double-hungwindows

upto 40' (101.6crn)wide.AspecialWideWindowKiLlsavailable

fromyourdealeror servicecenter.See "Accessories."

P/N 66129901167 1

Summary of content (8 pages)

PAGE 1
INSTALLA]]ONINSTRUC]]ONS Gatherthe requiredtoolsand parts be|ore starting installation, Read and follow the InstTuctlons providedwith any toolslisted here. IMPORTANT: Observeall governingcodesand ordinances. Check the locationwhereair condltJonerwlllbe Installed.Proper Installation Is your responsibility.Make sureyou haveeverything necessarylor correctinstallation. The locationshouldprovide: [] GroundedelectzicalouLietwiLhin4 ft(122 cm) of where the power cordexits the air conditioner.
PAGE 2
--A--T-B ! I A. 27" (68.6cm) minimum B. 161/4" (41.3 cm)minimum [] Height: 16" (40.6 cm) plustwice thickness o| wood used to buildframe. [] Depth: 21/2" (6.4 cm) minimum to 6 ¼"(15.9cm) maximum. C A. 16"(40.6 cm) B. 22Sl8" (57.5 cm) C, Wood thickness I D. 2/z" (6.4) minimum to 614"(15.9cm) maximum.
PAGE 3
I NSTALLATION INSTRUCTIONS E_mlw [] Remove _e window lock bracket and screwf_om the air condltioner and set aside,Io.
PAGE 4
NOTES: Bottom view [] Handle the air conditioner gently. [] Be sure your air conditioner cabinet does notlalloutol opening during installation or removal. the The place where the power cord exits the air conditioner should be no more than 4 It(122 cm) from a grounded 3 prong outlet. A [] Do not block the louvers on the front panel. [] Do not block the louvers on the outside oi the air conditioner. B A. Curtain housing B.
PAGE 5
Install Cabinet into Window Attach Side Curtains to Window Frame 9. Pullthe left-hand curtainout untilit fits intothe window channel.Use a 3/=,,drillbit to drilla starter holethroughthe hole in the curtain housingand into the lower window sash. [] Handlethe air conditionergently. [] Be sureyour air conditionercabinetdoes notfalloutofthe openingduring installationor removal. [] The place where the power cordexits the air conditioner shouldbe no more than 4 ft (122 cm) from a grounded 3 prongoutlet.
PAGE 6
Complete Installation 1. Inser_seal behind the top of the lower window sash and againstthe glassof the upperwindow. 2. Place one window-lockbracketon top of Iowerwindow and against upper windowsash on eachside ol the window. 3. Use a 3/32"drillbitto drilla starter holesthroughthe holesin each bracket intothe window sash. 4. Attach both the window-lock brackets to the window sash with #10 x 3A"round-headscrews to securewindow in place. C A A. Window lock brackets B.
PAGE 7
m Use 1" (2.5 cm) or thicker lumber lot wood |reme. I' 21 A -,I Insertcabinetint_ the [reinedwall opening.Thetop of the cabinetshould extend z/4(19.1 ram) intothe room.if there is trim,the cabinet shouldextend 3/4(19.1 ram) past the trim. B A, Outside width B. Outside height C, Depth 4, Apply the wood preservativeto the outsideexposedsurface. 5. Insertthe frame in the wall opening.Square and level lrame. 6. Attach |reme securelyto the wall. install Cabinet _ _od A. 3/4 (19.
PAGE 8
i El_l_l Co.nwt grmm gmu_ FMllura W do sa a_ Sth_k _m _ult _ | to gmu.d in da_ s=_w. or al_'.tr_l a_k 2, Connectgroen groundwireto csbineLbesewi_ grounds¢rew, Posi_ongroundwire poinUngstraightup, Put=excessground wire between¢oil aad =ircondiUoner cabineL A A. Gxeee9mead _ B, Gmued serew NOTE: Forl;h_,gh,_e.w=!] in:_t=lia_ns,il needed,ins=li molding aroundthe room side or cabinet.