Use and Care Guide

32
CARE AND CLEANING
To replace the oven door:
IMPORTANT
Special door care instructions - Most oven doors
contain glass that can break. Do not close the
oven door until all the oven racks are fully in
place. Do not hit the glass with pots, pans, or
any other object. Scratching, hitting, jarring, or
stressing the glass may weaken its structure
causing an increased risk of breakage at a later
time.
1. Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(Figure 30).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge
arm over the roller pins located on each side of
the oven door frame (Figure 30). The hook of
the hinge arms must be fully seated onto the
roller pins.
3. Fully open the oven door, horizontal with floor
(Figure 28).
4. Lift and turn/push the levers on both of the
door hinge locks up towards and into the oven
frame to the locked position (Figure 29).
5. Close the oven door.