Warranty

10
PRODUCT INSTALLATION AND USAGE
The product can be used immediately after taken out of the
package (no installation is required).
FUNCTION BUTTONS
After plugged into a power outlet, the unit will beep and enter
the standby state (all the function indicators and buttons are off).
ON/OFF BUTTON
1. In the standby state, press to turn the unit on. Once the
unit is on, it will be in the following default state:
a. Fan is on low speed . (Whenever the unit is turned on,
it will run 3 seconds at medium speed before returning to
the speed it was turned off in.)
b. Cooling/humidifying is off.
c. Mode is set to normal mode .
d. Timer 1h, 2h, 4h, 8h is off.
e. Left/right oscillation is off.
2. After you are done using the unit, press the button to turn
off all functions. The unit will then enter the standby state.