Welcome .................................. 2 important Safety instructions .. 3-4 Setting Surface Surface Controls .... 4-7 Cooking ..................... Care & Cleaning ................. 8 9-11 Before You Call Solutions Common to Problems Warranty Visit the Frigidaire http://www, ............................ ................................ 1 2 14 Web Site at: frigidaire,com READ AND SAVE THESE INSTRUCTIONS 318200628 (1105) Rev.
Questions? 1-800-944-9044 (United States) 1 =866-294-9911 CCanada) Please attach sales receipt here for future reference. Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible.Your satisfaction is our number one priority. We know you'll enjoy your new appliance and ThankYou for choosing our product. We hope you consider us for future purchases.
Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This SymbOl will help alert you tOsituations that may cause serious bodily harm; death or property damagel This symboi Will help alert you to Situations that may Cause bodily injury 0r property damagel • Remove all tape and packaging wrap before using the appliance.
• Protective Liners. Do not use aluminum foil to line any part of the appliance. Only use aluminum foil as recommended for baking if used as a cover placed on the food. Any other use of protective liners or aluminum foil may result in a risk of electric shock or fire or short circuit. • Glazed Cooking Utensils. Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range top service without breaking due to the sudden change in temperature.
iVlodeis with Ceramic Glass Cooktop About the Ceramic Cooktop Glass (some models) The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop. Heat istransferred up through the surface of the cooktop to the cookware. Only flat-bottom cookware should be used.
Models with Ceramic Glass Cooktop (some models) Operating Single Radiant Surface Elements (all Ceramic Glass Cooktop models) Your cooktop is equipped with Single Radiant Surface Elements. To Operate the Single Surface Elements: 1. Place correctly sized cookware on the radiant surface element. 2. Push in and turn the surface control knob in either direction to the desired setting (Figure 1 ). Turn the knob to adjust the setting if desired.
Models with Ceramic Glass Cooktop (some models) Warm Zone Feature (some Ceramic Glass Cooktop models) To operate the warm zone Your appliance is equipped with a warm zone. The purpose of the warm zone is to keep hot cooked foods at serving temperature. Always start with hot food. It is not recommended to heat cold food on the warm zone.
Surface cooking Selecting Surface Cooking Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1). Be sure to followthe recommendations Cookware *CORRECT INCORRECT q t" o Curved and warped bottoms. t pan • Flat bottom and straight sides. • Tight fitting lids, • Weight of handle does not tilt pan. Pan is well balanced. for using cookware as shown in Figure 2.
(Cleaning Cleaning Various Chart) Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER. Surfaces How to Clean Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth.
Cam Coil Surface Element &Cleaning (some models) Becareful To Remove and Replace Surface Elements and Drip Bowls not to bend terminal ends when replacing elements ATTENTION: Never leave covers on the coil elements as they could be permanently damaged if the coil is turned on by accident. after cleaning. Prior to cleaning the coil elements make sure they are cold and that control knobs are turned to OFF. Coil elements clean themselves when they are turned on.
Care Ceramic Glass Cooktop Consistent and proper &Cleaning Cleaning €=eaning & Maintenance is essential tO maintaining (some models) your Ceramic g!ass €ooktop Prior to using your cooktop for the first time, apply the recommended CERAMA BRYTE® Cleaning Creme to the ceramic surface. Clean and buff with a non abrasive cloth or pad. This will make cleaning easier when soiled from cooking.
OCCURRENCE POSSIBLE CAUSE/SOLUTION Entire cooktop operate. (1) House fuse has blown orcircuit breaker has tripped. Check/reset breakeror replace fuse. If the problem is a circuit overload, have this situation corrected by a qualified electrician. (2) Service wiring not complete. Contact installation agent or dealer. (3) Power outage. Check house lights to be sure. Call local electric company. does not Surface element does not heat. (1) No powertoappliance. Check/reset breakeror replace fuse.
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance Exclusions with the provided instructions. This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
