Manual

Type B (Electronic Timer)(some models)
NOTE: The basictimer is externally arranged in different configurations in various appliance models. Some timers are equipped
with push-buttons identified by word(s), while others have pads identified by symbols or words. Seefigures below for example of
timers used in different models.
COOK TIME STOP 11ME CLOCK "nME_
CUBSON
Selector Control Knob
OFF
[]
TIMED
cuss_ MINLr_
®
Temperature Control Knob
Control Pad Functions
Read the instructions carefully before using the oven.
sta rt Pad
Cook Time
Signal Light
Stop Time
Signal Light
Clean Pad
Cook Time Stop Time Up and Down Clock Pad Timer Pad
Pad Pad Arrow Pads
NOTE: Cook time and stop time signal lights are represented by solid rectangles in the timer display.
General Information
When the appliance isfirst connected or after a power interruption, the display flashes "18:88". This signal reminds you to set the
clock to the correct time of day. When this is done, the electronic timer can be used asa timer or to set the oven start and stop
times for semi-automatic cooking (stop time is not set) or fully automatic cooking (stop time is set).
The function selected by pushing the individual pad or button is exactly the same for all timer versions.
Important electronic timer information
1. You must set the clock when the oven is first plugged in or each time the power supply to the oven has been disconnected or
interrupted. Theclock must always be set to the correct time of day, as the automatic start and stop time operations (used to
set the timed bake) work directly with the clock.
2. A beep sounds each time a function pad or button pushed.
3. If an error is made while setting the timer, press CANCEL and set timer again.
Oven Control Guide
4