All about the Use & Care of your Electric Range TA B L E O F C O N T E N T S Important Safety Instructions ........................... 3-5 Setting Oven Controls .................................. 10-13 Before Setting Oven Controls .............................. 6 Care & Cleaning ..........................................14-17 Before Setting Surface Controls ....................... 7-8 Before You Call ............................................ 18-19 Setting Surface Controls (Coil cooktop) ........
PRODUCT RECORD AND REGISTRATION Contents Thank you for choosing Frigidare. Product Registration ...................................................... 2 Important Safety Instructions ............................ 3-5 Before Setting Oven Controls .................................. 6 Removing, replacing & arranging oven racks ................ 6 Before Setting Surface Controls ........................... 7-8 Cookware material types ............................................ 8 Home Canning ..................
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
IMPORTANT SAFETY INSTRUCTIONS WARNING • Storage in or on appliance—flammable materials should not be stored in an oven, warmer drawer, near surface units or in the storage drawer. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range. • DO NOT LEAVE CHILDREN ALONE —children should not be left alone or unattended in the area where appliance is in use.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP • Clean the range regularly to keep all parts free of • Know which knob controls each surface heating unit. Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. grease that could catch fire. Pay particular attention to the area around each surface element. Do not allow grease to accumulate.
BEFORE SETTING OVEN CONTROLS Oven vent location Removing, replacing & arranging racks The oven vent is located under the left rear surface element (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent. To remove - pull the rack forward until it stops. Lift up front of rack and slide out. To replace - fit the rack onto the guides on the oven walls.
BEFORE SETTING SURFACE CONTROLS Using proper cookware The size and type of cookware used will influence the setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in Figs. 1 & 2. Cookware should have flat bottoms that make good contact with the entire surface heating element . Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 1). • Flat bottom and straight sides. • Tight fitting lids.
BEFORE SETTING SURFACE CONTROLS Cookware material types Home Canning The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: Be sure to read and observe all the following points when home canning with your appliance.
SETTING SURFACE CONTROLS Operating surface elements CAUTION • Surface elements may appear to have cooled after they have been turned off. The element surface may still be hot and burns may occur if the element or the area surrounding the element is touched before it has cooled sufficiently. • Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite.
OVEN CONTROL FUNCTIONS READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below. Feature indicator lights— These indicator lights show if bake or broil is active. Bake pad—Use to select the bake feature. Up and down arrow pads— Use with the feature or function pads to set oven temperature or adjusting the clock and minute timer. Broil pad— Use to select the variable broil feature.
SETTING OVEN CONTROLS Setting the minute timer Setting bake 1. Press timer on-off. The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). The factory preset bake temperature is 350°F (177°C). 2. Press the to increase the time in one minute increments. Press and hold the to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
SETTING OVEN CONTROLS Setting broil Use the broil feature to cook meats that require direct exposure to radiant heat for optimum browning results. When broiling always remember to arrange the oven racks while oven is still cool. Insert For medium done steaks, position the oven rack closer to the broil element (positions 4 or 5; Fig. 1). For well-done foods such as chicken, fish, lobster or thick cuts of meat, position the oven rack further from the broil element. Broil pan To set Broil 1.
SETTING OVEN CONTROLS Adjusting oven temperature Operating oven light (some models) Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.
CARE & CLEANING Cleaning recommendation table Surface type • • • • Control knobs Painted body parts Painted decorative trim Aluminum, plastic or vinyl trim pieces Recommendation For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners on any of these materials; they can scratch.
CARE & CLEANING Surface elements and drip bowls CAUTION • Make sure drip bowls are in place - Absence of these bowls during cooking may subject wiring or components underneath to damage. • Never immerse a surface element in water. • Be sure the range is cool before removing surface elements or drip bowls. Be careful not to bend terminal ends when replacing surface elements after cleaning. • Protective liners—Do not use aluminum foil to line surface drip bowls, or reflector pans.
CARE & CLEANING Caution for aluminum use on the cooktop • Aluminum Foil - Use of aluminum foil on a hot cooktop can damage the cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the surface elements under ANY circumstances. • Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop.
CARE & CLEANING Removing and replacing the lift-off oven door CAUTION The oven door is heavy. For safe, temporary storage, lay the oven door flat with the inside of the door facing down. To remove oven door 1. Open oven door completely (horizontal with floor-Fig. 1). 2. Remove 2 screws located on the inside of the oven door liner (See A Fig. 2). 3. Insert the 2 screws into the door hinge holes located on the side of the hinge arm, one into each hinge (See B Fig. 2). 4.
BEFORE YOU CALL • Solutions to common problems Problem Solution Poor baking results. • Many factors affect baking results. Make sure the proper oven rack position is used. Center food in the oven and space pans to allow air to circulate. Allow the oven to preheat to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time. If you feel the oven is too hot or cool, see “Adjusting Oven Temperature” section in this Use & Care Guide.
Solutions to common problems • BEFORE YOU CALL Problem Solution Oven smokes excessively during broiling. • Incorrect setting. Follow broiling instructions in Setting Oven Controls. • Make sure oven door is opened to broil stop position. • Meat too close to the broil element. Reposition the oven rack to provide proper clearance between the meat & the element. Preheat the broil element for searing. • Meat not properly prepared. Remove excess fat from meat.
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.